Wave properiies of supersonic jets

AI Thread Summary
Supersonic jets are typically based far from cities primarily due to the disruptive sonic booms they create when breaking the sound barrier. These sonic booms are shock waves produced by the jet, which can cause significant noise and even structural damage, such as shattering windows. The intensity of these waves increases as the jet approaches and exceeds the speed of sound, making urban areas unsuitable for their operation. Additionally, the noise pollution generated by supersonic flights is a major concern for populated regions. Therefore, air bases for these jets are strategically located to minimize the impact on civilian life.
gapgirl1010
Messages
21
Reaction score
0
Teachers Question:
Why are the air bases of super sonic jets usually located far away from cities? Your response should discuss wave properties.

I don't know what to answer. I have searched everywhere for it. Please help me!
 
Physics news on Phys.org
Have you ever heard a sonic boom?
 
I am guessing that as the sonic jets take off they break the sound barrier and it will break the glass of people's houses once they take off. Also that it is too noisy

But how do I discuss wave properties?
 
http://www.kettering.edu/~drussell/Demos/doppler/doppler.html

Check this site out, should show you everything. Cool pictures of the boom as well which I never knew was visible.
 
Last edited by a moderator:
Thanks for your help!
 

Thread 'Errors and significant figures'

I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
View full post »
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'

Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'

Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is（Figure 2）： F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
View full post »
Thread 'A cylinder connected to a hanging mass'

Thread 'A cylinder connected to a hanging mass'

Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
View full post »

Similar threads

Shock Waves Traveling to the Ground from a Jet
Replies
2
Views
2K
[Updated] How Did an F-35 Fighter Jet Go Missing While on Autopilot?
2
Replies
87
Views
9K
Is there a way to find the velocity of air in a flute?
Replies
8
Views
3K
Minimum velocity for a sonic boom?
Replies
6
Views
3K
Heat transfer in wing by anti-ice system using hot air in piccolo tube
Replies
6
Views
1K
Supersonic motion: no backward propagating shock waves
Replies
2
Views
1K
Amplitude of waves at a further distance
Replies
1
Views
1K
What formulas should I use to calculate drag for a supersonic bullet?
Replies
2
Views
2K
A How Does Jet Injection Work in Fluid Dynamics?
Replies
6
Views
1K
I Subsonic and Supersonic Airflow Through a Constriction
Replies
13
Views
16K

Hot Threads

Recent Insights

Back
Top