What Are the Mean Lifetime and Branching Ratios for an F- Particle?

  • Thread starter Thread starter genloz
  • Start date Start date
  • Tags Tags
    Mean
genloz
Messages
72
Reaction score
1

Homework Statement


1. In a theory a charged particle called F- (charge=-1) exists. This particle has three decay modes that will be observed at the LHC. The mean time between F- particle creation and each kind of decay is found to be:
Mode Mean lifetime
Mode 1 5 microsec
Mode 2 50 millisecond
Mode 3 20 microsec
What is the mean lifetime of the F particle, and what are the branching ratios for each of the three modes?

Homework Equations


None given, but my thoughts were that these were relevant:
\Gamma_{overall} = \frac{1}{\tau}
Branching Ratio= \frac{\Gamma_{partial}}{\Gamma_{overall}}

The Attempt at a Solution


Mean Lifetime:
\tau = ((5*10^{-6})+(50*10^{-3})+(20*10^{-6}))/3
\tau = 1.66*10^{-2}

\Gamma_{overall} = \frac{1}{\tau}
\Gamma_{overall} = 60.24

Branching Ratio for Mode 1:
\Gamma_{partial} = \frac{1}{\tau}
\Gamma_{partial} = \frac{1}{(5*10^{-6})}
\Gamma_{partial} = 200000
Branching Ratio= \frac{\Gamma_{partial}}{\Gamma_{overall}}
Branching Ratio= \frac{200000}{60.24} = 3320

But then that didn't look much like a ratio so I started to wonder if I'd made a mistake or units were incorrect or something?
 
Physics news on Phys.org
Okay, I had a bit of a think and came to this conclusion...
\Gamma_{overall}=\frac{1}{\tau_{1}}+\frac{1}{\tau_{2}}+\frac{1}{\tau_{3}}

Therefore,

Mode 1
\Gamma_{partial1}=\frac{1}{5*10^{-6}}
\Gamma_{partial1}=200000

Mode 2
\Gamma_{partial2}=\frac{1}{50*10^{-3}}
\Gamma_{partial2}=20

Mode 3
\Gamma_{partial3}=\frac{1}{20*10^{-6}}
\Gamma_{partial3}=50000


So,
\Gamma_{overall}=250020

So the branching ratios are:
Mode 1
\frac{\Gamma_{partial1}}{\Gamma_{overall}}=\frac{200000}{250020}
=0.7999

Mode 2
\frac{\Gamma_{partial2}}{\Gamma_{overall}}=\frac{20}{250020}
=7.999*10^{-5}

Mode 3
\frac{\Gamma_{partial3}}{\Gamma_{overall}}=\frac{50000}{250020}
=0.19998

Does that sound about right?
 
I guess the width should be hbar/meanlife but I don't think that matters in this instance...
 
Thread 'Need help understanding this figure on energy levels'
This figure is from "Introduction to Quantum Mechanics" by Griffiths (3rd edition). It is available to download. It is from page 142. I am hoping the usual people on this site will give me a hand understanding what is going on in the figure. After the equation (4.50) it says "It is customary to introduce the principal quantum number, ##n##, which simply orders the allowed energies, starting with 1 for the ground state. (see the figure)" I still don't understand the figure :( Here is...
Thread 'Understanding how to "tack on" the time wiggle factor'
The last problem I posted on QM made it into advanced homework help, that is why I am putting it here. I am sorry for any hassle imposed on the moderators by myself. Part (a) is quite easy. We get $$\sigma_1 = 2\lambda, \mathbf{v}_1 = \begin{pmatrix} 0 \\ 0 \\ 1 \end{pmatrix} \sigma_2 = \lambda, \mathbf{v}_2 = \begin{pmatrix} 1/\sqrt{2} \\ 1/\sqrt{2} \\ 0 \end{pmatrix} \sigma_3 = -\lambda, \mathbf{v}_3 = \begin{pmatrix} 1/\sqrt{2} \\ -1/\sqrt{2} \\ 0 \end{pmatrix} $$ There are two ways...
Back
Top