What Incline Is Needed for a Toboggan to Slide Downhill?

  • Thread starter Thread starter kamalpreet122
  • Start date Start date
AI Thread Summary
The discussion focuses on determining the minimum incline required for a toboggan to slide down a snowy hill, given the coefficients of static and kinetic friction. The calculations indicate that an incline of approximately 81.5 degrees is necessary for the toboggan to start sliding. For the second part of the problem, participants clarify that the acceleration needed to find the angle for the child to accelerate at half the rate of gravity is indeed 4.9 m/s². The approach involves recalculating forces and using the relationship between mass and acceleration to derive the angle. The conversation emphasizes understanding the physics behind the problem and encourages collaboration for problem-solving.
kamalpreet122
Messages
13
Reaction score
0

Homework Statement



On a cold day, a 35kg child takes a 3.5 kg toboggan to a snowy hill to slide down it. There is Us = 0.15 and Uk=0.05 between the hill and the toboggan. What is the minimum incline required before the toboggan will slide? What angle is required for the child to accelerate at half the rate of gravity?

The Attempt at a Solution



Given:
Us (coefficient of static friction) = 0.15
Uk (coefficient of kinematic friction) = 0.05

Ff (force of friction) = -X-component of Weight (mg)
Fn (normal force) = - Y-component of weight (mg)

therefore...
Ff = -mgCos\theta-------- 1
Fn = -mgSin\theta-------- 2

From equation 1

mg = - Ff / Cos\theta ----- 3

Sub in 3 into 2

Fn = - (-Ff/Cos\theta )( Sin\theta )
Fn = FfTan\theta

Minimum angle required for the object to slide is Critical Angle.. (therefore theta now represents critical angle)

--> Fn= FfTan\theta ------ 4

Ff = UsFn ---------5

Sub in 5 into 4

Fn = UsFnTan\theta

Fn / UsFn = Tan\theta

Tan\theta = 1 / Us

Tan\theta = 1 / 0.15

-----> Tan\theta = 6.67
\theta = Tan-1(6.67)
\theta = 81.5

So therefore 81.5 degrees is the minimum incline required for the toboggan to slide.. I think that's the answer to the first part of this problem.. I am not too sure though because I'm in grade 11 and haven't been taught much about such types of problems. Can someone please help me do the second part and check if i did the first part right.. i would really really appreciate it.
 
Last edited:
Physics news on Phys.org
It looks like you've done the first part correctly; it's a somewhat unconventional approach but works just fine!
For the second part, you'll have to use the equation sum of forces= mass*acceleration. Recalculate the forces using the acceleration and mass given, the y-components of the forces will still add to zero so calculate the x-component of the force. Then work backwards to calculate theta.
Hope this helps.
 
i get that but the problem i face is .. there is no given acceleration =(
 
or do i use half of g (9.81/2) as the given acceleration ?
 
Yep, the given acceleration is just (9.8/2) m/s^2 or 4.9 m/s^2
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top