What Initial Horizontal Velocity Is Needed to Clear the Shelf Below?

  • Thread starter Thread starter runner1738
  • Start date Start date
  • Tags Tags
    Minimum Range
AI Thread Summary
To determine the initial horizontal velocity needed to clear a shelf below a 6 m vertical drop, one must first calculate the time it takes for an object to fall 6 m under gravity, which is 9.8 m/s². This time can be derived using the formula for free fall, t = √(2h/g), where h is the height (6 m) and g is the acceleration due to gravity. Once the time is known, the required horizontal velocity can be calculated by dividing the horizontal distance (6 m) by the time taken to fall. The horizontal velocity remains constant since there is no air resistance affecting it. Ultimately, the initial horizontal velocity is crucial for ensuring the rock barely clears the shelf.
runner1738
Messages
71
Reaction score
0
You are standing at the top of a cliff that has a stairstep configuration. There is a vertical drop of 6 m at your feet, then a horizontal shelf of 6 m, then another drop of 4m to the bottom of the canyon, which has a horizontal floor. You kick, a .72 kg rock,giving it an inital horizontal velocity that barely clears the shelf below. The acceleration of gravity is 9.8m/s^2. Consider air friction to be negligible.

What initial horizontal velocity veloctiy v will be required to barely clear teh edge of the shelf below you? Answer in units of m/s.

sorry this one i don't really haev a clue on what should i be looking at?
 
Physics news on Phys.org
You can solve this by calculating how long it takes a projectile (with 0 initial vertical velocity) to drop 6m (the drop to the ledge). Then use that time to find out what initial horizontal velocity it would take to move 6 m (the shelf length) in that time. Remember that since there is no air resistance, the horizontal velocity is a constant (not accelerated). You could then find out where the rock ultimately lands, if asked.
 
are you saying then that because its the same size 6 x 6 that the velocity in each direction is teh same? but also to calculate the velocity in y isn't it just 6/9.8?
 
No to both questions.

The velocity in the horizontal direction is what you need to find. The "initial" horizontal velocity is the same as the final horizontal velocity since it is not accelerated in that direction.

The velocity in the y direction is not needed in this problem per se, but if you want to find it, it is a function of time: vy = at, where a = -9.81m/s/s (I've defined "up" as positive for this problem.) and t is the time elapsed since the kick. If, say, you want to find the y-velocity when the rock reaches the ledge, you could use vy2 = voy2 + 2aΔy, where voy is the initial y-velocity (0 m/s), a =-9.81m/s/s again, and Δy is the final height minus the initial height = -6m.

You could use that result to find the time elapsed using v = at. Or you could have found the time directly using y -yo = .5*a*t2 + voyt

Either way, the initial horizontal velocity is found by dividing the distance moved in the horizontal direction (+6m) by the time elapsed, t.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top