What is the Critical Value of Friction for a System of Blocks to Move Together?

  • Thread starter Thread starter rwx1606
  • Start date Start date
  • Tags Tags
    Friction Value
AI Thread Summary
In a system of three blocks, the critical value of static friction determines whether the blocks can move together under an applied external force. If the coefficient of static friction is too low, it cannot generate enough frictional force to prevent the smaller blocks from sliding off the larger block, regardless of the applied force. The normal force increases with the push, but insufficient friction means that the blocks will not accelerate together. The discussion highlights the relationship between static friction, normal force, and the ability of the blocks to maintain their positions relative to each other. Understanding this critical value is essential for analyzing the motion of the blocks in the system.
rwx1606
Messages
31
Reaction score
0

Homework Statement


So I have a system with 3 blocks, one small block is on top of the bigger block and another small block is on the left side of the bigger block. You apply an external force to the block on the side such that the system accelerates together. Assuming there is a friction force between the blocks and no friction between floor and the bigger block, the question asks if the coefficient of static friction is less than some critical value, then no matter how hard how you push the system the blocks will not move together. Why?


Homework Equations


F=Ma


The Attempt at a Solution


I know the harder you push, the greater the normal force will be between the small block on the side and the bigger block. I also know that it's friction that allows the block on top to accelerate with the big block. But looking at the questions, I can't see why if you decrease the coeff. of static friction you can't increase the force? Is it because if the coeff. of friction is so small, it would required an infinite force to keep the block on the side from sliding down and to keep the block on top stationary with respect to the bigger block?
 
Physics news on Phys.org
rwx1606 said:
… to keep the block on the side from sliding down …

uh? sliding down what? :confused:
 
sliding down the side of the bigger block.
 
rwx1606 said:
sliding down the side of the bigger block.

what shape is this block? :confused:
 
square.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top