What Is the Equation for a 3-Dimensional Stream Function?

  • Thread starter Thread starter stan
  • Start date Start date
  • Tags Tags
    Function Stream
AI Thread Summary
The discussion centers on the existence and formulation of a 3-dimensional stream function. Participants note that while 3D stream functions can be conceptually understood, they are typically represented using two stream functions to simplify the continuity equation. It is emphasized that a true 3D stream function is complex and generally only applicable in axisymmetric flows, where properties remain constant along one direction. The consensus is that while 3D stream functions exist physically, they are challenging to express mathematically. Overall, the topic highlights the limitations and complexities of representing flow in three dimensions.
stan
Messages
18
Reaction score
0
hi

does anyone know the equation for a 3-dimensional stream function?

for a 2 dimensional case, u=d(stream function)/dy and
v=-d(stream function)/dx..


so does anyone knows how to express u, v and w in terms of the stream function for a 3-dimensional case...

thanks.



stan
 
Engineering news on Phys.org
stan said:
hi

does anyone know the equation for a 3-dimensional stream function?

for a 2 dimensional case, u=d(stream function)/dy and
v=-d(stream function)/dx..


so does anyone knows how to express u, v and w in terms of the stream function for a 3-dimensional case...

thanks.
stan

I have never seen a tridimensional stream function, although it exists. In words of Anderson in his book of Computational Fluid Dynamics and Heat Transfer:

"For the case of 3-d flows, it is possible to use two stream functions to replace the continuity equation. However, the complexity of this approach usually makes it less atractive than using the continuity equation in its original form".

Try to derivate it using two stream functions.
 
stream function for three dimensional flow also exists but only for axisymmetric flow i.e the flow properties in the third direction(say z axis) is same or in other words the derivative w.r.t (d/dx)that, will be zero.
 
devrana01 said:
stream function for three dimensional flow also exists but only for axisymmetric flow i.e the flow properties in the third direction(say z axis) is same or in other words the derivative w.r.t (d/dx)that, will be zero.

I agree. Stream functions in general do not exist in three dimensions, but only in a special case. Of course 3D stream functions exist physically but can not be represented mathematically.
 
How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'
Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
I'd like to create a thread with links to 3-D Printer resources, including printers and software package suggestions. My motivations are selfish, as I have a 3-D printed project that I'm working on, and I'd like to buy a simple printer and use low cost software to make the first prototype. There are some previous threads about 3-D printing like this: https://www.physicsforums.com/threads/are-3d-printers-easy-to-use-yet.917489/ but none that address the overall topic (unless I've missed...
Back
Top