What Is the Final Temperature of a Heated Copper Ball?

  • Thread starter Thread starter FishieKissie06
  • Start date Start date
  • Tags Tags
    Ball Copper Final
AI Thread Summary
To find the final temperature of a heated copper ball, volume expansion must be used instead of linear expansion due to the three-dimensional nature of the object. The correct formula is ΔV = 3αVΔT, where ΔV represents the change in volume. The initial volume can be calculated using the radius, which should be converted to meters. The increase in radius must be considered as half the increase in diameter. Proper application of these principles will yield the final temperature of the copper ball.
FishieKissie06
Messages
6
Reaction score
0
A copper ball with a radius of 1.4cm is heated until its diameter has increased by 0.22mm. Assuming a room temperature of 22*C, find the final temperature of the ball.

well what i did was i used linear expansion for this and i didnt get it right. i used (delta)L=(alpha)initial L*(delta)Temperature...solving for temperature
 
Physics news on Phys.org
Well in order to do this... you must use volume expansion since it is not a rod gaining length... so you must use the equation... (delta)V = 3*alpha*V*(delta)T and for (delta)V you can substitute in V1-V2
and remember that you must have it in raidus and not diameter when finding (delta)V so... since the radius then increases by (d/2) you have to remember to convert to meters for both of the radius...
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top