What is the Minimum Tangential Velocity to Land on $1.00 on Wheel of Fortune?

AI Thread Summary
To determine the minimum tangential velocity needed to land on $1.00 on the Wheel of Fortune, the wheel's radius is 3.00m, and it has 20 positions, with the contestant starting 4 positions away from the target. The contestant must account for a deceleration of 0.400 rad/s² while calculating the necessary angular velocity. The calculations show that the initial angular velocity needed is approximately 1.00265 rad/s, leading to a tangential velocity of about 3.008 m/s. However, ambiguity arises regarding the direction of the spin, as it could affect the total number of spaces to cover. Clarification on the spin direction is essential for accurately solving the problem.
Extremist223
Messages
7
Reaction score
0

Homework Statement


The wheel of fortune wheel, whose radius is 3.00m, has 20 different numbers, at equal intervals, for a contestant to land on. The second contestant can spin the wheel, and wishes to land on the $1.00. The wheel starts off 4 positions away from the $1.00. Assuming a deceleration of 0.400 rad/s2, what must be the minimum tangential velocity for the contestant to reach the $1.00, if they pull the wheel down?

Homework Equations


2pi rads is a full circle
w^2 = wo^2 + 2(alpha)(theta)
alpha= angular acceleration
theta is distance in radians travelled
w^2 is final angular velocity squared
wo^2 is initial angular velocity squared
Tangential Velocity = Radius x w

The Attempt at a Solution


2pi/20= 0.314 rads per interval
the goal is 4 intervals away from the start therefore 4x0.314= 1.257 rads travelled.
it wants to land 4 intervals away from the start so the final angular velocity = 0 rad/s
therefore w^2 = wo^2 + 2 (alpha)(theta)
0 = wo^2 + 2(-.4rad/s^2)(1.257)
-wo^2= -1.0056rad/s
wo^2 = 1.0056rad/s
wo= 1.00265rad/s
so at this point i took vt= rw vt= 3m x 1.00265rad/s vt = 3.008m/s

I'm getting the answer wrong and I don't know why. Can anyone help me please?
 
Physics news on Phys.org
It could be that you are really 16 spaces away because of the direction you are required to spin in. Looks okay otherwise.
 
thanks it seems to be the case one of the multiple choice answers is very close to this, but since it doesn't specify where on the wheel it is being pulled down from left side or right side this question is ambiguous
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top