What is the Power Delivered by the Person Pulling the Rope?

  • Thread starter Thread starter glockstock
  • Start date Start date
  • Tags Tags
    Power Work
AI Thread Summary
The discussion centers on calculating the power delivered by a person pulling a rope to lift a 6.1-kg box. For constant speed lifting, the power is determined using the formula P = F * v, resulting in 0.120 kW. When lifting with constant acceleration, the force exerted by the person must account for both the gravitational force and the net force required for acceleration. The average power is calculated by multiplying the total force by the average velocity, which requires determining the box's acceleration and average velocity using kinematic equations. The key takeaway is that the person must exert enough force to overcome gravity and provide the necessary acceleration for the box.
glockstock
Messages
5
Reaction score
0

Homework Statement


A 6.1-kg box is being lifted by means of a light rope that is threaded through a single, light, frictionless pulley that is attached to the ceiling.

(a) If the box is being lifted at a constant speed of 2.0 m/s, what is the power delivered by the person pulling on the rope?

(b) If the box is lifted, at constant acceleration, from rest on the floor to a height of 1.4 m above the floor in 0.42 s, what average power is delivered by the person pulling on the rope?


Homework Equations


P = F * v
KE = .5mv^2
W = F * distance
W = KE

The Attempt at a Solution


I've answered the first problem, getting .120 kW as an answer. But I'm having trouble with the (b), and maybe the concept of average power is throwing me off. I don't know what to do with the time given (0.42 s) and the height (1.4 m)...I know power is KE/T, but I don't know what the velocity is in KE since no acceleration was given. Thanks for your help! Much appreciated.
 
Physics news on Phys.org
If the box is lifted at constant acceleration from rest, you can find the acceleration using the kinematic equation for x(t).
 
Last edited:
OK, so using the kinematic equation I've found the acceleration to be 15.87 m/s^2...do I use another kinematic equation to find a velocity, and use F=ma with the mass of the box (6.1kg) and my acceleration (15.87) to get a force of 96.81N, then multiply that by the velocity for power? Or do I have to consider the force of gravity too, and subtract that force from the 96.81N...
 
You need to consider the force of gravity. F = ma gives you the net force not the force the person is exerting on the box. Once you find the force exerted by the person, you need to multiply by the average velocity to get average power.
 
P=Fv=ma(vavg)
SOLVE FOR a:
h=\frac{1}{2}at2

PLUG IN a and SOLVE FOR vavg (which is v/2):
v2=2ah​
 
Last edited:
Rubber Band said:
P=Fv=ma(vavg)


SOLVE FOR a:
h=\frac{1}{2}at2

PLUG IN a and SOLVE FOR vavg (which is v/2):
v2=2ah​


The power that Rubber Band proposes as the answer is not the power delivered by the person. It is the power delivered by the net force. The person has to deliver enough power to do two things, overcome gravity and accelerate the box. The tension in the rope is equal and opposite to the force the person exerts. Therefore, the power delivered by the rope is the same as the tension. When a rope accelerates a bucket up (or down), the tension is not ma.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top