Which Iceboat Finishes with Greater Momentum?

AI Thread Summary
In the discussion about the iceboat race, it is established that both boats finish with the same kinetic energy due to identical forces and distances. However, the boat with mass 2m crosses the finish line with greater momentum, as it experiences a longer time under the force, resulting in a larger impulse. The confusion arises in calculating the relationship between their velocities, where the correct derivation shows that the heavier boat's velocity is √2 times that of the lighter boat. This leads to the conclusion that the momentum of the heavier boat is indeed √2 times greater than that of the lighter boat. The participants clarify the algebraic steps to reach the correct relationship between the masses and their respective velocities.
learnitall
Messages
10
Reaction score
2

Homework Statement


Two iceboats hold a race on a frictionless horizontal lake. The two iceboats have masses m and 2m. Each iceboats has an identical sail, so the wind exerts the same constant force F on each boat. The two ice boats start from rest and cross the finish line a distance s away. The total work done to accelerate each of the boats from rest are the same (because the net force and displacement were the same for both). Hence both iceboats cross the finish line with the same kinetic energy.

a)Which iceboat crosses the finish line with greater momentum?

b)Can you show that the iceboat with mass 2m has √2 times as much momentum at the finish line as the iceboat of mass m?


Homework Equations


J = p2-p1=ƩFΔt
p=mv
K=(1/2)mv2
W=Fds


The Attempt at a Solution


I know that the boat with mass 2m will have greater momentum crossing the finish line by realizing the boat with the larger mass will take a longer amount of time for it to travel from rest to a distance s. Thus the impulse from the larger boat will be bigger. Since the iceboat starts
from rest, this equals the iceboat's momentum p at the finish line:
P=FΔt.

Im having trouble with part b of the problem. This is my thought process:

Both boats will cross the finish line with the same kinetic energy
∴ (1/2)mv2=(1/2)(2m)[(1\2)v2

Half, of the heavier boat's, square speed must be equal to the square of the lighter one for the kinetic relation to be true. If this is the case then,
can't I make new relation of speeds? what I mean is:
(1/2)vheavier2=vlighter2
after some algebra → (vheavier)/√2 = vlighter


so

pheavier=2mvheavier
plighter=mvlighter


so to find how much larger the momentum of the heavier boat is to divide the two using the substitution of the lighter velocity:
(2m)(vheavier)/[(mvheavier)/√2] = 2√2


why is my quantity two times larger than it should be?
 
Physics news on Phys.org
Equating the kinetic energies was a right choice... But the simplification was a bit confusing...
learnitall said:
(1/2)vheavier2=vlighter2
after some algebra → (vheavier)/√2 = vlighter
This is where it went wrong. It has to be √2vheavier=vlighter...
Other than that everything is fine, check your calculations and you will be on your way...
Regards
 
Abhilash H N said:
This is where it went wrong.
I think it went wrong a little earlier.
(1/2)mv2=(1/2)(2m)[(1\2)v2
To clarify
(1/2)mvlight2=(1/2)(2m)vheavy2
Take it forwards from there.
 
Ah, i see now. I didnt need that extra (1/2) factor. I also understand why I didnt need it. Thanks guys
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top