Windsurfer making a turn (Centripetal Acceleration)

AI Thread Summary
The discussion focuses on calculating the centripetal acceleration of a windsurfer making a turn while maintaining a constant speed of 10 m/s. The windsurfer's path is assumed to be a quarter of a circle, leading to a calculated radius of approximately 31.8 m. Using the formula for centripetal acceleration, the acceleration is determined to be π (approximately 3.14 m/s²). Participants clarify that while linear acceleration is zero due to constant speed, there is still acceleration due to the change in direction. The final consensus confirms that the centripetal acceleration is correctly calculated as π, directed radially.
eddyy08
Messages
6
Reaction score
0
"A windsurfer and their board have a total mass of 100 kg. While making a turn downwind, their heading changes from due west to due south over a 5 s time interval. If they maintain a constant speed of 10 m/s while doing this, determine their acceleration while taking the turn."

v=Δx/Δt
10=(2πr/4)/5 assuming his path is a perfect 1/4 of a circle

r=31.8 m

a=v^2/r
a=10^2/31.8

a=3.14 , actually π if you don't round your answers.

It seems like I've done it correctly, but 3.14 or π doesn't seem correct to me... please verify if my answer is correct.

Thanks in advance
 
Physics news on Phys.org
eddyy08 said:
"A windsurfer and their board have a total mass of 100 kg. While making a turn downwind, their heading changes from due west to due south over a 5 s time interval. If they maintain a constant speed of 10 m/s while doing this, determine their acceleration while taking the turn."

v=Δx/Δt

I think you've got things a little mixed. So let's start with this. In terms of linear acceleration it's 0. Surferdude maintained constant speed.

But in terms of the velocity vector v there was an acceleration due to his change in direction. So for acceleration a, we have ...

a = Δv/Δt = Δ<Vx,Vy>/Δt.

Over the 5 sec time period you have

a = Δv/Δt = Δ<10 x,10 y>/5 = Δ<2 x, 2 y>. Directed at 45° to positive x. (East)
 
I know that the linear acceleration is 0, what I want to figure out is the centripetal acceleration.
 
eddyy08 said:
I know that the linear acceleration is 0, what I want to figure out is the centripetal acceleration.

In thinking about it, I guess I'm the one that had it mixed. It does seem to indicate that they want the acceleration "while" making the turn not "in" making the turn, and centripetal acceleration is = π as you already found, directed radially.

As the numbers work out you end with R = V2/π which means that V2/R = π
 
Thanks a lot I appreciate it :)
 
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top