Power Factor OCT of Transformer

[jegues]

Homework Statement

See statement below.

Homework Equations

The Attempt at a Solution

I've been reading through the notes for my course and in the section where we are determining the parameters for transformers.

For the OCT they give,

240V, 1.066A, 136.6W

From this they calculate Rc and Xm which I understand how to do but underneath in bold it says,

"Calculate the power factor of the transformer during the OCT and comment."

Wouldn't the PF of the transformer just be,



PF = \frac{136.6W}{240V \cdot 1.066A} = 0.533

Is there something to take away from this? It wouldn't be put in bold in my notes for no reason.

What am I to conlcude from this?

 

[NascentOxygen]

"Calculate the power factor of the transformer during the OCT and comment."

Wouldn't the PF of the transformer just be,

PF = \frac{136.6W}{240V \cdot 1.066A} = 0.533

Is there something to take away from this? It wouldn't be put in bold in my notes for no reason.

What am I to conlcude from this?

Just guessing, but perhaps it's what you write as the comment that is valued, rather than the easy calculation? It would be true that this pf has practically no bearing on the pf under significant load.

I suppose the ideal OC pf would be 0. That would mean zero real power losses when the device is connected to the mains but completely unloaded.

 

[rude man]

Homework Statement

See statement below.

Homework Equations

The Attempt at a Solution

I've been reading through the notes for my course and in the section where we are determining the parameters for transformers.

For the OCT they give,

240V, 1.066A, 136.6W

From this they calculate Rc and Xm which I understand how to do but underneath in bold it says,

What does "OCT" mean? Open secondary?

 

[NascentOxygen]

open circuit test

 

[rude man]

Homework Statement

See statement below.

Homework Equations

The Attempt at a Solution

I've been reading through the notes for my course and in the section where we are determining the parameters for transformers.

For the OCT they give,

240V, 1.066A, 136.6W

From this they calculate Rc and Xm which I understand how to do but underneath in bold it says,

"Calculate the power factor of the transformer during the OCT and comment."

Wouldn't the PF of the transformer just be,


PF = \frac{136.6W}{240V \cdot 1.066A} = 0.533

Is there something to take away from this? It wouldn't be put in bold in my notes for no reason.

What am I to conlcude from this?

I see nothing wrong with what you concluded

Maybe your instructor likes bold type ... ?