Contact angle of liquid drop on solid surface.

AI Thread Summary
Point 44 of the referenced PDF document discusses the concept of surface tension and its directional properties. Surface tension acts tangentially to the surface of a liquid, influencing the shape of droplets and the behavior of interfaces. The direction of surface tension is determined by the forces acting on the molecules at the surface, which are unbalanced compared to those in the bulk of the liquid. Additionally, surface tension at solid-air interfaces is considered in force balance calculations for liquids to account for interactions at the boundary. Understanding these principles is crucial for analyzing fluid behavior in various applications.
amk_dbz
Messages
41
Reaction score
0
Can anyone explain point 44 of the attached pdf document on surface tension.

(Here's the link in case attachment doesn't work:
http://www.sakshieducation.com/EAMCET/QR/Physics/Jr Phy/12Surface tension _198-208_.pdf)

How is the surface tension direction found out?
Also why is surface tension for Solid-Air Surface considered when balancing forces on liquid?
Any help will be appreciated
Thank you.
 
Physics news on Phys.org
direction will be tangential to both interfaces.
 
Thread 'Gauss' law seems to imply instantaneous electric field'

Thread 'Gauss' law seems to imply instantaneous electric field'

Imagine a charged sphere at the origin connected through an open switch to a vertical grounded wire. We wish to find an expression for the horizontal component of the electric field at a distance ##\mathbf{r}## from the sphere as it discharges. By using the Lorenz gauge condition: $$\nabla \cdot \mathbf{A} + \frac{1}{c^2}\frac{\partial \phi}{\partial t}=0\tag{1}$$ we find the following retarded solutions to the Maxwell equations If we assume that...
View full post »

Thread 'Highway: Deriving speed from Doppler shift'

I passed a motorcycle on the highway going the opposite direction. I know I was doing 125/km/h. I estimated that the frequency of his motor dropped by an entire octave, so that's a doubling of the wavelength. My intuition is telling me that's extremely unlikely. I can't actually calculate how fast he was going with just that information, can I? It seems to me, I have to know the absolute frequency of one of those tones, either shifted up or down or unshifted, yes? I tried to mimic the...
View full post »

Similar threads

B Stability of Droplet Climbing on a Needle with Varying Contact Angle
Replies
2
Views
2K
A Resonant frequencies of liquid in a cylinder
Replies
14
Views
2K
Why are the three different surface tensions in the directions shown?
Replies
4
Views
1K
Explaination of Solid-Liquid and Solid-gas surface tension
Replies
5
Views
3K
Tension in a deformed cylindrical bag on a surface
Replies
18
Views
1K
Excess pressure inside a Liquid drop
Replies
5
Views
2K
What is the thickness of the drop if its radius is r?
Replies
1
Views
2K
I Measuring advancing contact angle
Replies
1
Views
2K
Derjaguin Formula for Contact Angle Prediction | Explained and Illustrated
Replies
3
Views
3K
Measuring contact angle of immiscible liquids
Replies
2
Views
1K

Hot Threads

Recent Insights

Back
Top