Simulation Definition and 816 Threads

  1. G

    Real-time engine simulation - oil temperature

    Hi folks! A while ago, we discussed a real-time simulation of an oil cycle within a combustion engine. Back then I was focusing on volume flow and pressure and you were incredibly helpful in coming up with the required formulas, so thank you again for your help! I'm now moving to the next...
  2. A

    Simulation of transistor switch circuit

    Hello, I'm new to electronics and I'm reading a book currently to learn more about the topic. I'm currently on a section where I'm building circuits where I'm using a transistor as a switch. I decided to experiment with the circuit they gave me and put it in a simulation software called Proteus...
  3. A

    Is there a simple energy simulation for non-specialized use?

    hi i want to make a simple model for a light bulb for a project i am not "Mechanical and energy" specialized i just need it to avoid any thermal issues. is there a simple energy simulation for non-specialized use? thank you.
  4. T

    Help with an Apollo space program flight simulation guide

    Hi all, This is my first time posting on this forum. I'm not sure if this is the right place to ask this question so apologies in advance. Perhaps someone could recommend a more appropriate forum for me to post this on. I'm working on creating documentation for a simulation. It's an Apollo...
  5. P

    What Software Can Simulate EM Wave Interactions in a Faraday Cage?

    Hi guys, I'm wanting to simulate faraday cage form, analysing mesh perforations defined by wavelengths of different electromagnetic spectra (eg. radio, microwave, UV etc). Are there any good analysis softwares which I could import a pre-made digital model with these perforations and simulate...
  6. NotKepler

    Is the Universe a Mathematical Simulation?

    Now, we all know all physical things are related to math. EVERYTHING is related to math. Now, we have all heard the theory that we are all living in a simulation, right? What if... math is the coding of the simulation and throughout time we have been decoding our own simulation.
  7. B

    Simulation Software for a Permanent Magnet Alternator Design

    I am looking to try some design ideas using PMs for alternator design. I am a retired EE so I do not have corporate capital for simulation software. Does anyone know of low to medium cost simulation software that might be workable for basic flux/emf/etc calculations and modeling? Or other...
  8. J

    3-D simulation software with mathematical parameters

    I would like to know where it would be possible to download a 3d simulation software tha twould operate according mathematical pharameters
  9. S

    Understanding PhET simulation (Faraday's law)

    Homework Statement I am supposed to make a project based on this simulation, I am trying to see what is happening: https://phet.colorado.edu/en/simulation/faraday If I go to the "Transformer" tab, I have an electromagnet and a circuit consisting of a loop of wire and a light bulb. I can...
  10. O

    What is the Best 2D Physics Engine for a Real-Time Simulation Program?

    Hello! I'm trying to write a 2D program that uses simple physics. I was wondering what would be the best 2D physics engine to use in my case, and if it even matter what engine I choose. I also want my simulation to run in real time, so at least 30 fps on a decent home computer. I prefer a fast...
  11. R

    MATLAB Fraunhofer diffraction simulation in Matlab

    Hello, below is the screenshot from the book INTRODUCTION TO MODERN DIGITAL HOLOGRAPHY With MATLAB (TING-CHUNG POON, JUNG-PING LIU). This book is free to download. There is a script for Fraunhofer diffraction pattern and equation 1.40 is Fraunhofer diffraction formula in terms of Fourier...
  12. S

    Need tutorial for magneto static simulation of C-core (Imag)

    Hello all, I am a new member of this forum, I would like to know where can i find the detailed tutorial of magneto static simulation of C-core. I am in the middle of one project and for further move I need the magneto static simulation of C-core. The image is attached.
  13. I

    Ansys Maxwell simulation problem

    I am using Ansys 18.2 Maxwell 2D to analyze a transformer by using transient and magnetostatic solvers. Normally the analyses were completed correctly and took time like a half an our . But right now the simulations are comleted suddenly(in few seccond) and there is no error no result and no...
  14. JonMoulton

    New Life History Simulation Modeling Platform

    mod: approved HexSim Life History Simulation Modeling Platform - free to download. Landscape ecology, anyone? After >10 years of development, the HexSim life history simulator is ready for use by students and researchers.HexSim is a free, versatile, multi-species, life history simulator ideal...
  15. berkeman

    Looking for CFD simulation help on this Aero experiment

    Hoping to get some help on a stability analysis of this setup...
  16. L

    Vickers Hardness testing simulation on ANSYS

    I have tried to simulate the Vickers hardness on a substrate with a coating on it. I am really struggling to get it to work as the deformation is far too big. I have added the pictures of my model. Is there anyone that can help me with this?
  17. S

    I What is the propagation speed of a diffusion

    Hello everybody! For my water in nanoscaled-pores simulations with SPH I need a value for the characteristic velocity. My planned approach is to estimate this value by attaining the propagation speed of a diffusion wave. But I have problems with understanding this process since I find some...
  18. scott ketter

    What is the final velocity of a ball rolling through a tube?

    I am making a physics simulator and this problem is tricky. You have two freely moving objects with known masses and velocities in a frictionless environment. The first object is a ball and the second is a pipe. They are moving toward each other. I need to know what formulas are used to simulate...
  19. rumborak

    Detailed simulation or SlowMo of elastic collision?

    I was thinking about Newton's Cradle the other day, and I wondered how those collisions actually look like in detail. Which then got me thinking that my understanding of even a basic elastic collision of two macroscopic objects is weak to say the least. Simplified, the two objects could be two...
  20. D

    MATLAB General Relativity Package for Friedman Eqns: MATLAB, Mathematica

    I need to simulate the Friedman equations under different conditions of flat space. Can someone please tell me a good package in MATLAB, Mathematica or stand alone. I am most well versed in MATLAB but have coded in Mathematica before.
  21. S

    I Restricted three body problem (numerical simulation of gravitational attraction)

    Hello! I am implementing the three body restricted problem numerically (2 of them are massive and the 3rd one is not affecting them, so it is just moving in the potential created by them). I implemented it and if I put the 3rd one close to one of the big ones it moves in circles around it, while...
  22. nothing909

    Instrumentation amplifier practical results vs simulation

    I just have a simple question to ask. I'm simulating an instrumentation amplifier and then testing it practically. When I simulate it, my gain is 6, but when I test it, I get a gain of 5.54. I'm just wondering what is causing the slight drop in gain in the practical results?
  23. tony873004

    B Simulation: Our Solar System's Hyperbolic Residents

    This is a pannable simulation that will run in your browser. It shows where Pioneer 10 & 11, Voyager 1 & 2, New Horizons and ʻOumuamua are, how far they are from the Sun, and their speeds. simulation: http://orbitsimulator.com/gravitySimulatorCloud/simulations/1511746688216_hyperbolic.html...
  24. E

    Molecular Dynamics Simulation - How Do You Find Parameters?

    Hi all, I'm doing a bit of material science research at my university. I'm running molecular dynamics simulation programs like Lammps and Amber as part of it, and I'm pretty new to the whole thing (just like I'm pretty new to this forum). I'd like to ask, has anyone here used Amber to find their...
  25. T

    I Is simulation considered a type of quantitative analysis?

    Hello, I've been asked to talk about a time where I have used quantitative analysis. I once used simulation of the solar system to find out more about things like close approaches, and Gladmans criteria I was wondering if simulation is considered a quantitative method of analysis and if the...
  26. N

    The Simulation Interpretation of Quantum Mechanics

    It seems like every argument in favor of the Simulation Hypothesis revolves around the strangeness of Quantum Mechanics. So can the Simulation Interpretation be just as valid of an interpretation as Copenhagen or Many Worlds? If not why not?
  27. R

    Force equivalency in a physical simulation

    1. Homework Statement Question 1: given a rigid tetrahedron, with vertices A, B, C and D anchored to their initial locations with an arbitrary but uniform spring constant, will Cases 1, 2, and 3 below result in the same behavior of the system? - Case 1: a force of constant magnitude (red...
  28. G

    Fortran Simulating Contact Force in a Moving Dashpot System Using FORTRAN

    Hi there I am really new into programiing thing, and I am trying to make program of this problem usin FORTRAN I want the output to be Time,poisiton,velocity and contact force and i already know = amplitude U = velocity of the car d = rail distance and so far this is my program...
  29. A

    Modeling analytical solution of 1D heat equation

    I am trying to write code for analytical solution of 1D heat conduction equation in semi-infinite rod. The analytical solution is given by Carslaw and Jaeger 1959 (p305) as $$ h(x,t) = \Delta H .erfc( \frac{x}{2 \sqrt[]{vt} } ) $$ where x is distance, v is diffusivity (material property) and t...
  30. W

    Mathematical Simulation of Patent. Very General

    Hi All, Sorry for the vagueness of the post; I promised privacy to a friend who just obtained a patent. She asked me to find a way of testing the product. Since I have no access of any sort to a lab, I am considering doing Mathematical simulations. I wonder if anyone knows about this and/or has...
  31. Buzz Bloom

    I Dark Matter Simulation in Today's APOD

    Today's APOD https://apod.nasa.gov/apod/ap171031.html shows a simulation picture of the developing universe involving galaxy formations and dark matter thin threads. I am wondering if any PF participant can answer the following questions: 1. Why does dark matter form thin thread structures...
  32. J

    I How to determine if an asteroid will burn up or hit Earth?

    I want to make a interactive simulation that shows whether or not an asteroid will hit the surface of the Earth. It would have 2 sliders for you to control the speed and mass of the asteroid. The simulation will output "yes" or "no" if the asteroid hits the surface. Is there a mathematical...
  33. whatphysics

    Ansys Maxwell simulation taking too long

    simulation doesn't seem to be progressing. always stuck at this stage, see progress bar. any ideas how to solve? thanks! (btw I am trying to simulate it to get results of inductance for the copper coil)
  34. G

    Engineering Simulation of Circuits Without Kirchhoff's Laws?

    1. The problem statement, all variables, and given/known data I am currently drafting a proposal for a project in Computational Physics. I'm planning on creating a program that simulates circuits numerically instead of solving the system of equations. The purpose of my project is to observe the...
  35. P

    On why the safest form of AI is a simulation of the brain

    I have read differing arguments about the potential utility or negative issues arising due to AI. There are many concerns about the 'control problem' of AI or how to 'sandbox' AI so it can serve our interests and not let a fast takeoff of AI lead to a situation where AI is the sole power around...
  36. S

    Creating a Wind Tunnel Simulation: Where to Begin?

    Hi everyone, I am currently doing my Computer Science A-Level project and I'm thinking of simulating a wind tunnel but I am also having a really hard time figuring out how to start. I am programming it in Visual Basic (XNA) and using Blender for models. Could anyone guide me in the right...
  37. FallenApple

    Is there such a thing as multiple simulation?

    We know that a computer can simulate phenomena. Is it possible to simulate the same phenomena partially on different computers simultaneously? For example, Computer 1 simulates the front of a statue. Computer 2 simulates the back of a statue. Computer 3 simulates the birds eye view of a statue...
  38. H

    Validating Ionic Liquid Simulations: Error Analysis and Implications

    Dear all, I've been working on an ionic liquid that I was involved in simulating with Lammps, but when I started to write its paper, I found a mistake (or a neglect) that makes almost all the results useless. I would always compare the pVT simulation data with the corresponding experimental data...
  39. G

    Fluid dynamics: simulation of an oil system

    Good day folks! I am working on the simulation of an engine, and in particular the oil system makes my head ache. I already finished the calculations for viscosity and temperature, but now I'm stuck on coming up with formulas for pressure and flow rates. With what should I start? For...
  40. S

    How Does Heat Transfer Into a Sphere Over Time?

    Hi, I am looking to simulate a very - seemingly - simple case. Any advice on a software package would be helpful - preferably gui which doesn't have a steep learning curve. I want to model the heat flux into a sphere from the outside. The dimensions of the sphere are not important to me. I...
  41. M

    C/C++ Velocity Verlet C++ implementation

    I have been working on implementing a solar system system simulator in C++ - but am getting incorrect results on the order of 10^10 km, and it seems that the planets are moving directly away from the sun. I suspect that there is a mistake in the integrator (Velocity Verlet) that I have posted...
  42. V

    I Hyperbolic space simulation in VR

    I have come across an interesting simulation of hyperbolic space. I can't totally wrap my hand around it, though. But I am interested in technical part of it. As far as I see no object in the space would get curved when you are moving. The visual deformation is the result of bent light reached...
  43. R

    A Computer simulation of neutrino physics research

    I am researcher in computational condensed matter physics. Now, I want to start research on neutrino physics using simulation. Please anybody guide me how to start: I mean which software to use and from where to get experimental data and then simulate. Thank you,
  44. M

    I Solar system simulation -- Significant deviation of some Jovian moons

    I am working on a simulation of the solar system, but I am having problems with the orbits with Europa and Io shown in the image below, the orbits of Jupiter, Ganymede and Callisto are consistent with NASA's simulations. For all bodies I have used identical parameters in generating the initial...
  45. M

    I Solar system simulation errors

    Hi, as a side project I am making a solar system simulator in Python, but I am getting extreme inaccuracies. As the image shows - I am comparing the simulation to data obtained from NASA's Horizon. I have written a a basic Verlet integrator in the Python class posten below: import numpy as...
  46. M

    Spring Simulation: Visualize and Analyze Moving Systems

    How can I simulate this spring system and see how they move and behave? Thank you.
  47. P

    Logisim question -- Simulation of a small logic circuit is not working

    I am trying to implement the following circuit in Logisim, yet all I get is y=0. Any idea what might be the problem? First image is what I am trying to implement; second it my Logisim attempt which yields 0. I'd appreciate some feedback.
  48. C

    Buckling Simulation: Questions & Answers

    Hi everyone, My objective is to create a quantitatively accurate simulation of a column buckling. Ideally, I would like to apply a compressive axial force at or just above the critical load to an initially straight column (perhaps with a small perturbation) and see it transition from the...
  49. F

    Monte Carlo Simulation, Ising model in 2D

    Homework Statement Lo,Im stuck on how to retrieve the specific heat capacity from an MC simulation, with the metropolis algorithm. I want my graph to look something like this: https://i.stack.imgur.com/NXeXs.png Homework Equations C_v = ((<E^2>-<E>^2)/T^2 The Attempt at a Solution My code is...
  50. A

    Solve MCNP6 Simulation Issue: 10 Particles Lost

    I was running the MCNP input file. after simulation it shows that 10 particle are lost,( using MCNP6) I do not know where is a problem. How can i get to the solution?
Back
Top