12V diode combiner circuit question

AI Thread Summary
The discussion revolves around a 12V electrical setup for a 29' Bristol sailboat, specifically regarding the connection of an anchor and steaming light to separate breakers. The user seeks to have both lights activate when the anchor light breaker is turned on, while allowing the steaming light to operate independently. There is confusion about the necessity of a diode to achieve this functionality, with clarification that a standard 12V diode would suffice for the application. Additionally, it's noted that using both lights simultaneously is illegal, and modern lighting options may offer simpler solutions. The conversation emphasizes the importance of understanding wiring configurations in marine applications.
Rbandura
Messages
3
Reaction score
0
Hello, I'm currently doing an electrical refit on a 29' Bristol. I have an anchor/steaming light for the top of the mast. I'm connecting them to two separate single pole single throw breakers. My problem is that I need the steaming light (fwd light) to be able to come on indipendantly from the anchor light (both light) and vice versa. I know I can just put a diode in-between the breakers to solve this problem. But I'm not sure what sort of diode I need. It's a 12v system, each breaker is 5 amps. The lights themselves don't even draw one amp combined. Any help would be greatly appreciated. Thanks!
 
Engineering news on Phys.org
:welcome:

I don't understand your question. Each light has a ground connection. Each light has its own single pole switch for the positive side. You can turn them on/off independently. Why the question?

Edit: many modern mashead anchor/steaming/navigation/emergency flash LED lights come with a bit of smarts. They use one positive wire and one negative ground wire for all the lights. The control switch you push once for anchor, twice for steaming, three for nav, four for flash, five times for off. That is simpler than running separate wires for each. By the way, it is illegal to use your anchor light and steaming light at the same time.
 
Sorry, let me explain a little better. When I flip the breaker for the anchor light, I need both lights to turn on, when I flip it for the steaming light I just need the forward light to turn on.
The light it self is a single component with two bulbs. There are two positives coming out and they share a negative.

So this is a work project, I'm not going to lie I'm not much of a boater myself, I just work on them. So when it comes to coast guard regulations I'm pretty clueless. We do have other techs that sail and when talking with them they all said with that light that is the correct set up. I know it should be on a rocker switch but we have limitations in what we could add. So making it work on our main DC
panel breakers was our best option.
 
Rbandura said:
I'm connecting them to two separate single pole single throw breakers.

What is the matter with that? Why doesn't that do what you need?
 
It works if you throw both breakers for the anchor, and just the one for the steaming. But I want to be able to throw the anchor light breaker and activate both lights, while keeping the steaming on its own separate breaker as well.

I know I can achieve this with a diode, my main question was if there was a certain diode I needed for Marine applications. Or would any old 12v 3 amp diode do the trick.

I apologise for any confusion. I really do appreciate the help.
 
Rbandura said:
I know I can achieve this with a diode, my main question was if there was a certain diode I needed for Marine applications. Or would any old 12v 3 amp diode do the trick.

any normal diode ... there are no such things as marine diodes that I'm aware of
 
Last edited:
I used to be an HVAC technician. One time I had a service call in which there was no power to the thermostat. The thermostat did not have power because the fuse in the air handler was blown. The fuse in the air handler was blown because there was a low voltage short. The rubber coating on one of the thermostat wires was chewed off by a rodent. The exposed metal in the thermostat wire was touching the metal cabinet of the air handler. This was a low voltage short. This low voltage...
Thread 'How Does Jaguar's 1980s V12 Dual Coil Ignition System Enhance Spark Strength?'
I have come across a dual coil ignition system as used by Jaguar on their V12 in the 1980's. It uses two ignition coils with their primary windings wired in parallel. The primary coil has its secondary winding wired to the distributor and then to the spark plugs as is standard practice. However, the auxiliary coil has it secondary winding output sealed off. The purpose of the system was to provide a stronger spark to the plugs, always a difficult task with the very short dwell time of a...
Back
Top