A golfer gives a ball a maximum initial speed of 39.9 m/s.

AI Thread Summary
The longest possible hole-in-one for the golfer, given an initial speed of 39.9 m/s and neglecting rolling distance, can be calculated using projectile motion principles. The optimal launch angle for maximum range is 45 degrees, where both horizontal and vertical components of velocity equal 39.9*cos(45). The time of flight is determined by the vertical motion, where the time to reach maximum height is equal to the time to descend, calculated using the equation v = u + at. After determining the total time in the air, the horizontal distance can be found by multiplying the horizontal velocity by this time. The calculations yield the maximum distance achievable for a hole-in-one under the specified conditions.
MrGoodyear812
Messages
12
Reaction score
0
What is the longest possible hole-in-one for this golfer? Neglect any distance the ball might roll on the green and assume that the tee and the green are at the same level.

in m

and:

What is the minimum speed of the ball during this hole-in-one shot?

please explain your answers :D

thanks in advance
 
Physics news on Phys.org
MrGoodyear812 said:
What is the longest possible hole-in-one for this golfer? Neglect any distance the ball might roll on the green and assume that the tee and the green are at the same level.

in m

and:

What is the minimum speed of the ball during this hole-in-one shot?

please explain your answers :D

thanks in advance

You need to make two equations, one for height and one for x distance, based on some initial velocity and some angle. Can you think of what to do from there?
 
The maximum range that can be achieved will be done so when the ball is projected at an angle of 45 degrees to the horizontal. At this angle, both the horizontal and vertical velocities will be equal to 39.9*cos(45).

First, you should calculate the total time for which the ball is in the air.
Consider first the vertical motion of the ball. Neglecting air resistance and such, we can say that the time taken for the ball to reach its maximum height is equal to the time taken for the ball to fall back to the ground since the acceleration is constant (9.81m/s2).

The time to reach the maximum height can be calculated with the equation v=u + at where

v = 0 m/s
u=39.9*cos(45)
a=-9.81 m/s2
t= ?

Calculate t from this equation and double it to acquire the total time for which the ball is in the air.

Now consider the horizontal motion of the ball. The horizontal velocity is equal to 39.9 * cos(45). Using the time of flight which you just calculated, work out the horizontal distance travelled. (distance = speed * time)

This will be your answer since you do not have to worry about the ball bouncing or rolling.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top