A humble question about the 2N3904 transistor

  • Thread starter Thread starter dip
  • Start date Start date
  • Tags Tags
    Transistor
AI Thread Summary
The discussion centers on finding an integrated circuit (IC) equivalent for the 2N3904 transistor. Participants clarify that while the 2N3904 is a discrete transistor, suitable surface-mount equivalents include MMBT3904 and PZT3904. For applications requiring a Darlington array, users are advised to search for specific ICs that meet their circuit requirements, as many options are available for around $1.50. The importance of specifying the desired package type and application—such as switching or amplification—is emphasized. Ultimately, users are encouraged to explore parametric searches on electronics supplier websites for suitable alternatives.
dip
Messages
3
Reaction score
0
Is there an IC that has 2N3904 transitor in it? I have to use an IC instead of transistors so I was wondering what is it's IC equivalent? :confused:

Tnx.
 
Engineering news on Phys.org
What do you mean "IC" equivalent? The SMT equiv should be something like mmbt3904, or pzt3904. 2n3904 refers both to the case style (to-92 footprint) and the semiconductor material. If you search Fairchild, Vishey, ST, etc using the parametric option you'll probably come up with something. Or search the mmbt/pzt PN's if SMT is what you need. What package are you looking for anyway?

If you need multiple xstors in a dip type package you'll most likely have to do the parametric search using the 3904 characteristics.

Good luck.
 
IC = Integrated Circuit. I have to use a Darlington array in my ckt but my prof says use an IC. Geh...

Thanks anyways :)
 
I know "IC" mean integrated circuit; however, you needed to specify which package you needed. There are not a lot of "IC's" containing a single xstr which was why I asked.

Needing a darlington array is different than needing a 3904. Go to Mouser electronics and search for darlington array. You'll find many "ICs" for about $1.50 that will meet your requirements. Darlingtons are exceedingly common as ICs.
 
Ok, thanks
 
More importantly how the device is to be used. Switch? Amplifier? The 2003 (can't think of prefix) is a darlington switch. It is capable of a couple of hundred mA I believe. There are 7 darlington pairs on the device. It is typically used as a relay driver or similar application.
 
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
While I was rolling out a shielded cable, a though came to my mind - what happens to the current flow in the cable if there came a short between the wire and the shield in both ends of the cable? For simplicity, lets assume a 1-wire copper wire wrapped in an aluminum shield. The wire and the shield has the same cross section area. There are insulating material between them, and in both ends there is a short between them. My first thought, the total resistance of the cable would be reduced...
Back
Top