A service to buy/sell custom hardware projects?

  • Thread starter Thread starter KiwiKid
  • Start date Start date
  • Tags Tags
    Hardware Projects
AI Thread Summary
The discussion centers on the idea of creating a marketplace for buying and selling custom hardware projects and blueprints. Key challenges identified include the high cost of custom solutions compared to mass-produced items, the reluctance of hobbyists to monetize their passions, and difficulties in ensuring quality assurance. Suggestions for overcoming these hurdles include implementing a rating system and establishing clear expectations between creators and buyers. The conversation also references existing platforms like "Make" and the regulatory challenges associated with selling electronics commercially. Overall, there is interest in the feasibility of such a service among hobbyists and creators.
KiwiKid
Messages
38
Reaction score
0
I find it more than a little curious that so many people - including me, if I may say so - build cool, actually practical toys, yet I virtually never hear of people selling these (or blueprints/instructions on how to make them, etc.) to others. Thus, the idea of creating a 'hacker* creations market' (or something like that. It's not as if I've got it all worked out) popped into my head: a place where people can buy (maybe request) and sell hacks, creations and blueprints.

The problems I see with such a market are these:
- Custom solutions are more expensive than products made by people at an assembly line. Thus, hackers would need to demand quite a bit of money for a single solution, which buyers may not be willing to pay.
- Hacking is a hobby. People don't want to try to make money with their hobbies.
- Quality assurance would be difficult.

I think the first problem is avoidable/solvable, and the second problem is only a general sentiment few people actually care about (if you can make money with your hobby, I suspect most - not all - would take it). But, hey, I've been known to be wrong from time to time. I don't know how to solve the third problem, but at first thought I think a 'rating' system and a strict set of rules of what you can expect from the creator/buyer would be best.

Do you have any thoughts on this? Do you think it's possible? Would you or hackers you know like and use such a service?

* I use the word 'hack' and 'hacker' loosely to mean someone who builds interesting things. Things a la hackaday - not breaking into computers.
 
Engineering news on Phys.org
KiwiKid said:
I find it more than a little curious that so many people - including me, if I may say so - build cool, actually practical toys, yet I virtually never hear of people selling these (or blueprints/instructions on how to make them, etc.) to others. Thus, the idea of creating a 'hacker* creations market' (or something like that. It's not as if I've got it all worked out) popped into my head: a place where people can buy (maybe request) and sell hacks, creations and blueprints.

The problems I see with such a market are these:
- Custom solutions are more expensive than products made by people at an assembly line. Thus, hackers would need to demand quite a bit of money for a single solution, which buyers may not be willing to pay.
- Hacking is a hobby. People don't want to try to make money with their hobbies.
- Quality assurance would be difficult.

I think the first problem is avoidable/solvable, and the second problem is only a general sentiment few people actually care about (if you can make money with your hobby, I suspect most - not all - would take it). But, hey, I've been known to be wrong from time to time. I don't know how to solve the third problem, but at first thought I think a 'rating' system and a strict set of rules of what you can expect from the creator/buyer would be best.

Do you have any thoughts on this? Do you think it's possible? Would you or hackers you know like and use such a service?

* I use the word 'hack' and 'hacker' loosely to mean someone who builds interesting things. Things a la hackaday - not breaking into computers.

Yes, the words "hack" and "hackers" have negative connotations in many circles. I've changed your thread title to substitute the word "projects" for "hacks" to avoid the negative connotations.

Are you aware of the magazine "Make" and the associated "Maker Fairs"? I think that is somewhat along the lines of what you are asking about:

http://makezine.com/

.
 
There's a lot of books on amazon with "How to.." build your own speakers, amps, etc. There's even some book called 100 hacks or evil genius projects, and they give the designs for different electronics projects.
 
Part of the problem is that there are certain regulations that kick in once you start selling electronics on a commerical basis, you basically need to be able to present documentation saying that your gadget conforms to regulations XYX (EMC, health&safety if there are high voltages or currents involved); and getting the neccesary tests done can be very expensive.
Note that the need for addtional testing was one reason why the Raspberry PI was delayed.
 
Over the years I have found a number of web-sites that display cool projects that the owner of the site has done. A certain amount of money is made by selling the plans to those projects. Much better in my opinion than selling the actual hardware.
 
Hey guys. I have a question related to electricity and alternating current. Say an alien fictional society developed electricity, and settled on a standard like 73V AC current at 46 Hz. How would appliances be designed, and what impact would the lower frequency and voltage have on transformers, wiring, TVs, computers, LEDs, motors, and heating, assuming the laws of physics and technology are the same as on Earth?
While I was rolling out a shielded cable, a though came to my mind - what happens to the current flow in the cable if there came a short between the wire and the shield in both ends of the cable? For simplicity, lets assume a 1-wire copper wire wrapped in an aluminum shield. The wire and the shield has the same cross section area. There are insulating material between them, and in both ends there is a short between them. My first thought, the total resistance of the cable would be reduced...
I used to be an HVAC technician. One time I had a service call in which there was no power to the thermostat. The thermostat did not have power because the fuse in the air handler was blown. The fuse in the air handler was blown because there was a low voltage short. The rubber coating on one of the thermostat wires was chewed off by a rodent. The exposed metal in the thermostat wire was touching the metal cabinet of the air handler. This was a low voltage short. This low voltage...
Back
Top