A stone is dropped from a window 5m high what is its speed

  • Thread starter Thread starter indy92
  • Start date Start date
  • Tags Tags
    Speed Window
AI Thread Summary
The discussion revolves around calculating the speed of a stone dropped from a height of 5 meters using energy conservation principles. The stone initially possesses gravitational potential energy, which is converted into kinetic energy as it falls. The relevant formulas mentioned include gravitational potential energy (GPE = height x weight) and kinetic energy (KE = 1/2 x mass x speed^2). By equating the two forms of energy, the mass cancels out, simplifying the calculation. The key takeaway is that the speed can be determined without knowing the mass, relying solely on the height and gravitational acceleration.
indy92
Messages
3
Reaction score
0
Ok this might be a simple problem but i have no idea how to do it;

A stone is dropped from a window 5m high what is its speed when it hits the ground.

I don't need answer i just need a formula or some guidence
Thanks
 
Last edited by a moderator:
Physics news on Phys.org
What does the stone have at 5m high?(what kind of energy) when dropped...this kind of energy is converted into energy a body possesses by virtue of its motion...

Law of conservation of energy
 
at 5m it has gravitaitional potential energy and when its is dropped it is converted to kinetic energy
ive got the formula for GPE it is height x weight
and for kinetic energy its 1/2 x mass x speed^2

these might not be the right formulas as i don't have the mass
 
But...weight= mass x accel. due to gravity...so if you equate the two you will get:
1/2 x mass x speed^2= Height x weight

1/2 x mass x speed^2=Height x mass x accel. due to gravity


do you see anything canceling out?
 
amny thanks
i appreciate your help
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top