Adding Vectors with Given Lengths and Angle: A Basic Vector Problem

  • Thread starter Thread starter OrigamiCaptain
  • Start date Start date
  • Tags Tags
    Vector
AI Thread Summary
The discussion revolves around solving a vector addition problem involving two vectors with lengths of 10 and 14, and an angle of 25° between them. Participants emphasize the importance of establishing a coordinate system to effectively decompose the vectors into their x and y components using trigonometric functions. One user clarifies that after determining the components, the vectors can be added using the formula for vector addition. There is a focus on ensuring correct notation and understanding the relationship between the components. Overall, the conversation aims to clarify the steps needed to solve the vector problem accurately.
OrigamiCaptain
Messages
16
Reaction score
0

Homework Statement


I included the problem as an attachment. There is not question other than the problem. It was on a white board.

Homework Equations


I have no idea what to do with the downwards vector. I vaguely remember that I can't do anything, but I'm not sure.

The Attempt at a Solution


In the second attachment.

Thank you everyone for your help. I really want to understand this.

PS. My notation is a total disaster. What is the Y and what is the X?
 

Attachments

  • Office Lens_20140927_205324.jpg
    Office Lens_20140927_205324.jpg
    27.6 KB · Views: 458
  • Office Lens_20140927_211555.jpg
    Office Lens_20140927_211555.jpg
    35.8 KB · Views: 407
Physics news on Phys.org
Are you adding the two vectors together? Is that the problem?

I'm going to assume so. In terms of notation, it is best just to choose an x-y coordinate system to place your vectors. Also, try drawing them both originating from the same point. After you set up a coordinate system, decompose each vector into it's x and y components (using trig) and see where to go from there.
 
sun18 said:
Are you adding the two vectors together? Is that the problem?

I'm going to assume so. In terms of notation, it is best just to choose an x-y coordinate system to place your vectors. Also, try drawing them both originating from the same point. After you set up a coordinate system, decompose each vector into it's x and y components (using trig) and see where to go from there.

I'm still really confused. I feel like I'm close, just not quite there...
 
Ok so I went to sleep and tried looking at it again in the morning. I figured out were my x and y should go so that is no longer an issue. I used 65% for my angle and got 12.68 for my x just like before and 18.9 for my y. Again not sure if this is right, but I'll definitely understand how to do this once I figure it out.

If anyone else has any ideas that would be really helpful. Thanks.
 
I'm not sure exactly what you did, but some of the numbers you got match my results, so you're probably on the right track, if you haven't solved the problem completely.

If I understand you correctly, then you're supposed to add two vectors with lengths 10 and 14, and the only additional information you have is that the angle between them is 25°. I would denote the one of length 14 by u, and the one of length 10 by v, and I would choose the coordinate system so that u is on the x axis. Then do you see what the x and y coordinates of u and v are? Once you have u and v in the form ##(u_1,u_2)## and ##(v_1,v_2)##, you can just use the definition of addition: ##u+v=(u_1,u_2)+(v_1,v_2)=(u_1+v_1,u_2+v_2)##. Since no coordinates were given in the problem statement, you may want to also find ##|u+v|## and the angle that ##u+v## makes with the x axis.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top