When Should an Airplane Drop a Package to Hit a Target?

  • Thread starter Thread starter divlysian
  • Start date Start date
  • Tags Tags
    Airplane
AI Thread Summary
An airplane flying horizontally at 50 m/s drops a package from an elevation of 160m, raising questions about the timing and distance required to hit a target on the ground. The first problem asks how many seconds before reaching the target the package should be dropped, while the second problem seeks the horizontal distance from the target for the drop. The equations of motion for both vertical and horizontal components are discussed, highlighting the complexity of solving these problems due to the lack of simultaneous equations for both directions. One participant suggests that the questions may be flawed, as they found a solution by dividing horizontal displacements by velocity, which yielded a correct time but likely not the expected method. The discussion emphasizes the importance of understanding projectile motion to solve these types of problems effectively.
divlysian
Messages
1
Reaction score
0

Homework Statement



I tried many times to do these two problems but I can't seem to start somewhere...

An airplane is flying horizontally at a speed of 50 m/s, and at an elevation of 160m drops a package. In order to hit a certain spot on the ground, how many seconds before passing the spot must he drop the package?

A. 1.81s
B. 2.01s
C. 3.2s
D. 4.33s

An airplane is flying horizontally at a speed of 50 m/s, and at an elevation of 160m drops a package. In order to hit a certain spot on the ground, how far before passing over the spot must he drop the package?

A. 82.2m
B. 90.4m
C. 99.7m
D. 109m

Homework Equations



Vf = vi +at
Vf^2 = vi^2 + 2ax
x = vit + .5at^2

For both vertical and horizontal components of the projectile

The Attempt at a Solution



I don't even know where to start. I tried doing 160m = 50t + 4.9t^2 and doing quadratic formula for that but I got a t value that isn't an answer, and both questions are connected so I'm really stuck :/
 
Physics news on Phys.org
The horizontal and vertical components do not go into the same equation. So the horizontal acceleration is not 4.9, and the initial vertical velocity is not 50 m/s. Write out the information you know about the acceleration, velocity, displacement and such in the y direction, and then do the same for the x direction. These questions are kind of flawed because you can solve this question without using any of those equations, I divided each of the horizontal displacements by the horizontal velocity and saw which times overlapped with the first question, turns out only one of them did, so that would be your correct answer, but I think that is not what your teacher wanted. So try it out with projectile motion.
 
Last edited:
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top