Amusement Park Ride Design Rules & Guidelines

  • Thread starter Thread starter drewjmore
  • Start date Start date
AI Thread Summary
The discussion highlights concerns about the lack of oversight in amusement park ride design, referencing a personal experience where a mechanical failure occurred without injuries. A link to safety guidelines from the Consumer Product Safety Commission is provided as a resource for those seeking certification information. Participants express anxiety about the responsibilities involved in signing off on ride safety, especially when insurance companies require technical reviews. One contributor emphasizes the importance of thorough research and expresses a reluctance to engage in future amusement park projects despite potential financial gain. Overall, the conversation underscores the critical need for stringent safety measures in ride design and operation.
drewjmore
Messages
2
Reaction score
0
Can anyone direct me to some governing council or rules-of-thumb for the design of amusement park rides?
 
Engineering news on Phys.org
Here is a place to start
http://www.cpsc.gov/cpscpub/pubs/amuse.pdf#search=%22amusement%20park%20ride%20certification%22

I once helped to develop a new amusement park ride, and one of the most striking aspects of the job was that so little oversight was required. In the end, I was terrified to have my name attached to the project - probably one of the worst career moves ever made on my part. The mechanical engineer on the project screwed up and the ride failed while full of kids. Luckily no one was hurt.

Certification involved some guy with a roll of stickers.
 
Last edited by a moderator:
Oh yes, my customer was the guy who came up with idea to fill a room with sponge balls, as is often seen at McDonalds and other places. He made a fortune on that one.
 
Ivan Seeking said:
Here is a place to start
http://www.cpsc.gov/cpscpub/pubs/amuse.pdf#search=%22amusement%20park%20ride%20certification%22

I once helped to develop a new amusement park ride, and one of the most striking aspects of the job was that so little oversight was required. In the end, I was terrified to have my name attached to the project - probably one of the worst career moves ever made on my part. The mechanical engineer on the project screwed up and the ride failed while full of kids. Luckily no one was hurt.

Certification involved some guy with a roll of stickers.

Thanks for the link, Ivan! I am a bit nervous about this myself, I have a safety & industrial hygene background (among others...). One of my vendors has put me on to a 'local carnival operator' who needs an 'engineer' to sign-off on the safety of some changes they've made to one of their rides. Their insurance company won't cover them without some type of technical review. I intend to charge through the nose, and do ALL of my homework.
 
Last edited by a moderator:
I wouldn't touch another amusement park ride, even if I increased my rate by an order of magnitude.

Good luck!
 
Thread 'I need a concave mirror with a focal length length of 150 feet'
I need to cut down a 3 year old dead tree from top down so tree causes no damage with small pieces falling. I need a mirror with a focal length of 150 ft. 12" diameter to 36" diameter will work good but I can't think of any easy way to build it. Nothing like this for sale on Ebay. I have a 30" Fresnel lens that I use to burn stumps it works great. Tree service wants $2000.
Hi all, i have some questions about the tesla turbine: is a tesla turbine more efficient than a steam engine or a stirling engine ? about the discs of the tesla turbine warping because of the high speed rotations; does running the engine on a lower speed solve that or will the discs warp anyway after time ? what is the difference in efficiency between the tesla turbine running at high speed and running it at a lower speed ( as fast as possible but low enough to not warp de discs) and: i...
Back
Top