Angle between radius and acceleration

AI Thread Summary
A particle is moving clockwise in a circle with a radius of 2.50m, and the acceleration vector is 15.0 m/s² at a 30° angle to the radius. The discussion focuses on finding the radial and tangential components of acceleration, with attempts made to apply trigonometric relationships to resolve the components. The calculated radial acceleration is 12.9 m/s² and tangential acceleration is 7.5 m/s², leading to a velocity of approximately 5.67 m/s. The conversation also touches on the relationship between multiple accelerations and the necessity of additional information to determine the angle between them. Ultimately, the problem was resolved after initial confusion, demonstrating the importance of persistence in problem-solving.
KristinaMr
Messages
11
Reaction score
1

Homework Statement


A particle is moving clockwise in a circle of radius 2.50m at a given instant of time.

I have to find radiant and tangential acceleration and the speed of the particle.

The acceleration vector is 15.0 m/s² and the angle between the radius and the acceleration vector is 30°

Homework Equations



a tangential=∆v/∆t
a radial =v²/r
a =√at²+ar²
θ=?

The Attempt at a Solution


I tried finding the acceleration components but I was not able to use the data given in a proper way. I'm sure there is an equation involving the angle but I'm not sure which one it is.
I would use θ=tan^-1( at/at) but it results in two unknowns . I'm stuck on this probably easy problem. I need someone who knows the right equations to use.
Thank you
 
Physics news on Phys.org
Draw a picture and do a little bit of trig. If the acceleration makes an angle of 30o with the radius, what is its component along the radius? What about the tangential component which is perpendicular to the radius?

By the way, welcome to PF.
 
I tried finding the components of a vector using at= a sin 30 and ar=a cos 30.
ar is 12,9 m/s² and at = 7,5 m/s² . Then I found the velocity to be 5,67 m/s which looks to be approximately righ.

But what if I have the two accelerations and need to find the angle between them?
 
Your numbers look correct.

Usually you are given only one acceleration which points in the direction of the net force on a system. You can have as many forces as you wish acting on an object, but its acceleration will be in one direction. An object cannot accelerate in two different directions simultaneously. Nevertheless, to answer your question, if you are given two accelerations and you have to find the angle between them, you will be given additional information that will allow you to do so. For example, the direction between the two forces that provide these accelerations may be given or implied.
 
Thank you very much for your reply..Actually I have given up on this exercise, but then I returned to it and forced myself (successfully ) to find an answer.

Have a good day :)
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top