Angular Width of Electromagnetic Waves emerging from two buildings

AI Thread Summary
The discussion revolves around calculating the angular width of electromagnetic waves emerging from a gap between two buildings, using a cell phone signal at 800 MHz. The wavelength is determined to be 0.381 m, and the gap between the buildings is 15 m. The main approach suggested involves using the single-slit diffraction formula, specifically theta = sin^-1(wavelength/a), but there is confusion regarding whether to use the full gap or half of it in the calculations. Participants clarify that the angle calculated does not represent the angular width of the central maximum, prompting further exploration of the correct approach. The problem remains unresolved, with contributors seeking clarity on how to accurately determine the angular width.
randyjstark
Messages
2
Reaction score
0

Homework Statement


Hello everyone,

I have one more problem left of my homework and I seemed to be stumped. I don't even know where to begin with this problem, which comes from the section of my book labeled Single-Slit Diffraction. Anyways, here is how the problem reads:

Problem 22.18

You need to use your cell phone, which broadcasts an 800 MHz signal, but you're behind two massive, radio-wave-absorbing buildings that have only a 15 m space between them.

What is the angular width, in degrees, of the electromagnetic wave after it emerges from between the buildings?

I calculated the wavelength at 800mhz = .381m
a= 15m (distance of the slit OR distance between two buildings.

Homework Equations





The Attempt at a Solution



Due to the slit being so large, I am not sure how to approach the problem. I assume that we cannot use a small-angle approximation due to how large the slit and wavelengths are.

I think the equation to use would be the following
delta r= a/2 *sin(theta) = wavelength/2
However, I am not sure how to rearrange to get theta.

I tried rearrangeing to get aSin(theta) = wavelength => theta = sin-1(wavelength/a) and got 1.43 degrees. Would this be correct or did I just hammer the problem?

If anyway can give me a hand (or somewhere to start) I would really appreciate it.

Thanks,
Randy
 
Physics news on Phys.org
randyjstark said:
You need to use your cell phone, which broadcasts an 800 MHz signal, but you're behind two massive, radio-wave-absorbing buildings that have only a 15 m space between them.

What is the angular width, in degrees, of the electromagnetic wave after it emerges from between the buildings?

I've never heard of the "angular width...of the electromagnetic wave" before. I'm assuming that they meay the angular width of the central maximum.

I calculated the wavelength at 800mhz = .381m
a= 15m (distance of the slit OR distance between two buildings.

Yes, a would be the slit width.

Due to the slit being so large, I am not sure how to approach the problem. I assume that we cannot use a small-angle approximation due to how large the slit and wavelengths are.

Approach it like any other single-slit diffraction problem.

I tried rearrangeing to get aSin(theta) = wavelength => theta = sin-1(wavelength/a) and got 1.43 degrees. Would this be correct or did I just hammer the problem?

I agree that you need to find \theta=\sin^{-1}(\lambda/a). But you need to think about what angle that represents. That is not the angular width of the central maximum. So let me ask you, what angular width is it?
 
I do not know what angular width that represents. my book does not go into anymore details about this type of problem. Instead of just using a = 15m would I use a/2 = 7.5m? I do not know what else to do for this problem. I am kind of stumped.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top