Ansys tools for different software applications

AI Thread Summary
ANSYS offers various simulation tools tailored to different engineering disciplines, including Mechanical, Fluent, and Maxwell, which can be utilized simultaneously on projects. Mechanical engineering students typically engage with the 3D Design, Materials, and Structures packages, while Electrical Engineers and Physicists focus on Electronics and Semiconductors. The choice of ANSYS tools depends on the specific project requirements and the user's expertise. Additional resources are available online to help users learn more about the applications of these tools. Understanding the diverse capabilities of ANSYS can enhance simulation processes across various industries.
Rachelye
Messages
2
Reaction score
0
I am a mechanical engineering student and I know that our school will use ANSYS as simulation tools in the fall semester. And when I talk with one engineer, I know that they will use different kinds of ANSYS tools for the same project. The engineer uses ANSYS’s tools: Mechanical, Fluent, Maxwell for the same project.

I am wondering in different industries what kind of ANSYS’s tools will be used at the same time to finish the simulation process.

The graph below is ANSYS’s tool category I found online. Could you kindly please give me more instruction because I want to learn more about ANSYS’s tools during the Summer?
245398


Thank you so much. I appreciate every answer.
 
Last edited by a moderator:
Engineering news on Phys.org
Welcome to the PF. :smile:

Which ANSYS package you use most will depend on your skillset and the project you are working on. As an ME, you will most likely be working with the 3D Design, Materials and Structures packages. The EEs and Physicists on your team would most likely be using the Electronics and Semiconductors packages.

Browse through the links on this page to learn more about the applications of the various packages...

https://www.ansys.com/products?utm_source=bing&utm_medium=cpc&utm_campaign=TN_Brand_PH-Restructure&utm_device=c&utm_term=ansys tools&utm_adposition={adposition}&utm_content=72773988209833&utm_phone=844-859-6328&msclkid=f743620bd4061cbc7e733f0154fb72d8

245402
 
Thank you so much. I learn a lot from that. Could you tell me some popular tools in the 3D Design, Materials and Structures and Electronics packages? Thank you again.
 

Thread 'Query on Isentropic relationships (such as PV^gamma = constant)'

Hi all, I have a question. So from the derivation of the Isentropic process relationship PV^gamma = constant, there is a step dW = PdV, which can only be said for quasi-equilibrium (or reversible) processes. As such I believe PV^gamma = constant (and the family of equations) should not be applicable to just adiabatic processes? Ie, it should be applicable only for adiabatic + reversible = isentropic processes? However, I've seen couple of online notes/books, and...
View full post »
Thread 'How can I find the cleanout for my building drain?'

Thread 'How can I find the cleanout for my building drain?'

I am a long distance truck driver, but I recently completed a plumbing program with Stratford Career Institute. In the chapter of my textbook Repairing DWV Systems, the author says that if there is a clog in the building drain, one can clear out the clog by using a snake augur or maybe some other type of tool into the cleanout for the building drain. The author said that the cleanout for the building drain is usually near the stack. I live in a duplex townhouse. Just out of curiosity, I...
View full post »

Thread 'Dry sump pump issue'

I have an engine that uses a dry sump oiling system. The oil collection pan has three AN fittings to use for scavenging. Two of the fittings are approximately on the same level, the third is about 1/2 to 3/4 inch higher than the other two. The system ran for years with no problem using a three stage pump (one pressure and two scavenge stages). The two scavenge stages were connected at times to any two of the three AN fittings on the tank. Recently I tried an upgrade to a four stage pump...
View full post »

Similar threads

How Do Rigid Body Dynamics Analyses Work in CAD/CAE?
Replies
1
Views
2K
Maxwell Linear Generator (Input Power < Output Power and losses?)
Replies
2
Views
529
How to model "LITZ" or "STRANDED" coils and windings
Replies
7
Views
3K
What are the Applications of Magnetic Field Theory in Electric Drives?
Replies
1
Views
422
Ansys Maxwell -- How do I add a permanent magnet into my simulation?
Replies
5
Views
9K
What tests should I do for lightening an ev chassis
Replies
4
Views
1K
Job Skills Getting a Job in Simulation/Modelling with a MSc in Material Science
Replies
4
Views
2K
Runing multiple instances of Ansys Mechanical at the same time
Replies
2
Views
7K
Current FEA software/Comparison to Ansys
Replies
1
Views
4K
Curved Mesh on Symmetry Boundary in ANSYS Maxwell 3D
Replies
2
Views
3K

Hot Threads

Recent Insights

Back
Top