Approximate Maximum Deflection Of Beam

AI Thread Summary
The discussion revolves around estimating the maximum deflection of an electron beam in a CRT television screen due to Earth's magnetic field. The user calculated the speed of the electrons after being accelerated by 2.2 kV, arriving at a value of 2.78 x 10^7 m/s. However, the resulting deflection calculation of 3.16 meters was identified as incorrect, prompting questions about the voltage and the magnetic field value used. Participants suggested focusing on the deflection distance (dx) rather than the radius of the electron's path. The conversation emphasizes the importance of accurately modeling the electron's trajectory to determine the correct deflection.
Melqarthos
Messages
11
Reaction score
0

Homework Statement



Estimate the approximate maximum deflection of the electron beam near the center of a CRT television screen due to the Earth's field. Assume the screen is 20 from the electron gun, where the electrons are accelerated by the following voltages. Note that in color TV sets, the beam must be directed accurately to within less than 1 in order to strike the correct phosphor. Because the Earth's field is significant here, mu-metal shields are used to reduce the Earth's field in the CRT.

By 2.2 kV

Homework Equations



We know that

eV=Work
KE=(1/2)mv^2
and |q|vB=(mv^2)/R

The Attempt at a Solution



First I found the speed of the traveling electron(s):

(1.60*10^-19)(2.2*10^3)=(1/2)(9.1*10^-3)(v^2)
v=2.78*10^7

And then when I plug it into the equation

|q|vB=(mv^2)/r

I get a value of deflection to be 3.16 meters, which is not the write answer. I'm not too sure where I went wrong. If anyone could help me out that would be great!
 
Physics news on Phys.org
The 2.2 kV is very low - could it be 22 kV? Is that 20 cm from the screen?
What value did you use for B?

The radius you found is not the answer to the question. This is the situation:
CRT.jpg

The blue arc is the path of the electron. You are trying to find the red deflection distance marked dx.

If you can write an equation for the circle it will be easy to use it to find dx.
 
Last edited:
Ohh I see :)

I'll be sure to post the answer soon, just need to get down on paper first!

Melqarthos
 
whats the answer
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top