Audio and video lectures on mechanical engineering

AI Thread Summary
Numerous online resources offer audio and video lectures on mechanical engineering topics. Key subjects covered include fluid mechanics, dynamics of machines, heat and mass transfer, and kinematics. Additional resources feature basic thermodynamics lectures. These courses are valuable for students and professionals seeking to enhance their understanding of mechanical engineering principles. Accessing these materials can significantly aid in mastering complex concepts in the field.
seouldavid
Messages
118
Reaction score
4
There are some helpful courses and lectures related to mechanical engineering available on the Internet.

http://www.infocobuild.com/educatio...nical-engineering/mechanical-engineering.html

This contains audio/video courses and lectures in mechanical engineering such as fluid mechanics, dynamics of machines, heat and mass transfer, kinematics of machines, and principles of mechanical measurements.
 
Engineering news on Phys.org
Video lectures on basic thermodynamics.

http://nptel.iitm.ac.in/video.php?courseId=1120
 
Last edited by a moderator:

Thread 'Race car suspension Class'

Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
View full post »

Thread 'Cantilever help'

I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
View full post »
Thread 'What's the most likely cause for this carbon seal crack?'

Thread 'What's the most likely cause for this carbon seal crack?'

We have a molded carbon graphite seal that is used in an inline axial piston, variable displacement hydraulic pump. One of our customers reported that, when using the “A” parts in the past, they only needed to replace them due to normal wear. However, after switching to our parts, the replacement cycle seems to be much shorter due to “broken” or “cracked” failures. This issue was identified after hydraulic fluid leakage was observed. According to their records, the same problem has occurred...
View full post »

Similar threads

3D printers for mechanical engineering
Replies
1
Views
1K
A doubt about Mechanical Engineering problems and exercises
Replies
19
Views
3K
Lectures on computer science and engineering
Replies
13
Views
20K
Is mechanical engineering the right thing to learn?
Replies
4
Views
2K
Mechanical/Aerospace Engineering Undergrad Senior Design Project
Replies
3
Views
2K
Film Advance system research for DIY Camera
Replies
4
Views
3K
Heat transfer through a MultiLayer Cylinder (find the Temperature inside)
Replies
7
Views
3K
Lectures on Biology and Biological Engineering
Replies
12
Views
19K
Hi there! I'm Kiran. I need to know advance physics.
Replies
2
Views
664
Audio/video courses and lectures on chemistry
Replies
8
Views
26K

Hot Threads

Recent Insights

Back
Top