How Does Oscillator Frequency Affect the Energy Ratio K/E?

AI Thread Summary
The discussion focuses on deriving the ratio of average kinetic energy (K) to average total energy (E) for an oscillator in terms of the dimensionless quantity ωo/ω. The user has identified the expressions for K and E but is uncertain about calculating their averages over a specific time period. Suggestions include averaging K and E over the intervals where K is zero, specifically from t1 to t2, and using trigonometric identities to simplify the integrals of sin² and cos² functions. The user seeks clarification on applying these integrals to derive the final ratio, which is expected to be 1/[1 + (ωo/ω)²]. Further input on solving the integrals and confirming the approach is requested.
theuniverse
Messages
53
Reaction score
0

Homework Statement


Express the ratio of the average kinetic energy K to the average total energy E of the oscillator in terms of the dimensionless quantity ωo/ω.

Homework Equations


I found that:
K = (1/2)mA^2ω^2 sin^2(ωt − δ)
E = (1/2)mA^2[ω^2 sin^2(ωt − δ) + ωo^2 cos^2(ωt − δ)]

The Attempt at a Solution


I know that my answer should be 1/[1 + (ωo/ω)^2].
I also found out that the total energy at the frequency of ω=ωo is: E=(1/2)mA^2ωo^2 (resonance) and I think it somehow relates to this problem.
I'm not quite sure how to reach the answer itself, or to make it more clear - I don't know how to come up with the terms for average K and average E.

Can anyone explain it to me?
Thank you for you time.
 
Physics news on Phys.org
hi

basically, you can average over some time period. for example

K_{avg}=\frac{\int_{t_1}^{t_2}K(t)\,dt}{\int_{t_1}^{t_2}dt}

so how do you get t1 and t2 ? you can see that for

t=\frac{\delta}{\omega}

K is zero and again for

t=\frac{\pi+\delta}{\omega}

K is zero again. so we can let
t_1=\frac{\delta}{\omega}

and

t_2=\frac{\pi+\delta}{\omega}

which is the next value of t when K becomes zero. similarly you can average the total energy over the same range

E_{avg}=\frac{\int_{t_1}^{t_2}E(t)\,dt}{\int_{t_1}^{t_2}dt}

and then finally take the ratios...
 
I tried to take the integral of the energy expressions I had but the substitution of the t's became very complicated, so I was wondering, does integral [sin^2(ωt − δ)] and integral [cos^2(ωt − δ)] evaluated on the interval of t2 and t1 have a specific solution?

I know that the integral of [sin^2(ωt − δ)] over any complete period of oscillation T is equal to T/2. However I am not sure how to apply this to my problem.

I'd appreciate any further input.
 
use trigonometric identities to solve the integrals

\sin^2(\omega t-\delta)=\frac{1}{2}\left[1-\cos\,2(\omega t-\delta)\right]

and similar one for the other\cos^2(\omega t-\delta)=\frac{1}{2}\left[1+\cos\,2(\omega t-\delta)\right]
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top