Blackbody Radiation: 100K to 1000K Energy Increase

AI Thread Summary
The discussion focuses on calculating the increase in radiated energy when a blackbody's temperature rises from 100K to 1000K. The correct answer is identified as a factor of 10,000, based on the Stefan-Boltzmann law, which states that power is proportional to the fourth power of temperature (P ∝ T^4). Participants express confusion over the distinction between energy and power in the context of the problem, highlighting that the question does not explicitly mention power. The relationship between temperature and energy is clarified through the equations provided, emphasizing the importance of understanding the underlying physics. Ultimately, the consensus is that the energy increase is substantial due to the fourth power relationship.
CaneAA
Messages
13
Reaction score
0

Homework Statement



By what factor does the radiated energy increase when a blackbody changes temperatures from 100K to 1000K

a) 100
b) 6600
c) 1 x 10^ 4 <--- marked as the correct answer on the key.
d) 5.7 x 10^4
e) 1 x 10^6

Homework Equations



1) f(peak) = 5.88x10^10*T
2) E = hf

The Attempt at a Solution



By inspection, I see that if T increases by a factor of 10, the frequency will increase by a factor of 10 and so will the energy. So I'm getting that the answer is a factor of 10. I even plugged in numbers and I still get 10. I don't understand how they got that answer.
 
Physics news on Phys.org
I see, thank you. But how do you know they're referring to power and not energy? They don't mention power or rate of energy radiated.
 
If I told you that a mass was increased, then you would assume the gravitational force on it was also increased. It's a similar idea with energy and power.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top