Build a Wooden Car: Tips for Designing and Powering Your All-Wood Vehicle

  • Thread starter Thread starter amt86
  • Start date Start date
  • Tags Tags
    Build Car
AI Thread Summary
To build a wooden car powered solely by human effort, consider using a pedal system connected to the wheels via a wooden chain or belt mechanism for effective power transmission. A wheelchair-like design with large wheels could facilitate easier movement, while a Flintstone-style foot propulsion offers simplicity. Ensure the car can accommodate multiple riders for added points, and clarify if there are speed requirements to meet. The construction should strictly adhere to using only wood, wood glue, and water for lubrication. Collaboration and brainstorming on design and materials will be crucial for success.
amt86
I really need help! I along with 4 other people have to build a car out of ONLY wood and wood glue. The car must be powered by a person sitting in the "cab" of the car. It must travel 30 meters. For every extra person we fit in the car we earn more points. The only rule is that we can only use wood and wood glue...and water to lubricate if needed...NOTHING else! What would be the best way to transmit power from the pedals/crank/whatever to the wheels? Please help any ideas would be VERY, VERY, VERY, appreciated.
 
Physics news on Phys.org
Can it be moved like a wheelchair? (large wheels turned by hand?)
 
Or simply let the riders move it forward with their feet ala "Fred Flintstone"!
 
Is there a minimum speed requirement?
What kind of materials/costruction tools do you have available?
Did you have any ideas?
 

Thread 'Rolling without slipping on a curved surface'

Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
View full post »

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »

Similar threads

Help with a grade 12 physics project — small recoil powered car
Replies
11
Views
2K
Building a Model Car: Ideas for Traveling 10 Meters
Replies
1
Views
2K
Building a Model Car: Maximizing Efficiency with Newton's Law
Replies
9
Views
3K
Need help with balsa tower design
Replies
3
Views
2K
Help with building the brake a car for a physics project
Replies
1
Views
11K
I How find moment of inertia for car in turn?
Replies
49
Views
5K
Efficiency Factors of Power Stations and Electric Cars: A G.C.S.E. Analysis
Replies
1
Views
2K
Auto/Motor Design to 3D print RC car - Steering
Replies
8
Views
5K
How to Build a Supercapacitor Dragster on a Budget?
Replies
3
Views
3K
Physics Car Project: Honors Physics Student Seeks Ideas & Help
Replies
24
Views
6K

Hot Threads

Recent Insights

Back
Top