Bungee Jump: 65 kg, 11m Rope, 36m Fall

AI Thread Summary
A girl weighing 65 kg is bungee jumping from a height where she experiences an 11 m free fall followed by 25 m of simple harmonic motion. The spring constant (k) of the rope is calculated to be 25.48 N/m, and her maximum speed during free fall is 14.7 m/s, with a maximum speed of 15.65 m/s when the rope is fully stretched. The maximum speed occurs when the rope reaches its maximum stretch, which is at the end of the 36 m fall. The amplitude of the rope's motion is determined to be 25 m. The discussion emphasizes the need for accurate calculations and understanding the physics involved in bungee jumping dynamics.
getalifebaby
Messages
4
Reaction score
0
The girl is going on a bungee jump. She weighs 65 kg. The rope is 11m. In total, she fell 36 m. The first 11 m is free fall, and another 25m is simple harmonic motion.

1) k of rope
2)max spped
3)what point when she has max speed
4)amplitude of rope
5)how long does it take


Homework Equations


vf^2= 2ax
delta L= mg/k
_/(k/m) A- square rt of k/m times A


The Attempt at a Solution


initial velocity = 0
acceleration= 9.8m/s^2
1) k of rope
i got k for 25.48

2)max spped
max speed for free fall= 14.7m/s
V_max for rope= 15.65m/s
So do I add them up or just 15.65??!

3)what point when she has max speed
36m?

4)amplitude of rope
25m?

Thanks!
 
Physics news on Phys.org
why don't you show us how you solved each step, starting with the first one?
 
1) i used deltaL= mg/k

25m=65*9.8/k
k= 25.48

2) V_f^2=2(9.8)(11m)
V_f=14.7m/s for free fall
then
V_max= square rt of k/m *A
so sqr (25.48/65) *25= 15.65 m/s

Thanks
 
ok, for part 1 you have it right, but try using a more accurate value for g = 9.81 m/s2. It will actually change your final answer.

For part two, when do you expect the person to reach her final speed? And also, how did you derive "V_max= square rt of k/m *A"?
 
V_max when the rope reach maxium stretch.
I didnt derive it, it was a formula.
 
getalifebaby said:
V_max when the rope reach maxium stretch.
I didnt derive it, it was a formula.

oh i see what you meant now. but using kinetic and elastic energy relationships only holds when there is only an elastic force present for a given period of time. Is this the case?

And plus, try to picture the scenario visually: once the elastic of the bungee jump is full stretched, what would you expect to happen? What would you guess her speed to be?
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...

Similar threads

Replies
26
Views
5K
Replies
1
Views
4K
Replies
12
Views
2K
Replies
7
Views
2K
Replies
1
Views
5K
Replies
5
Views
10K
Replies
16
Views
5K
Back
Top