Buoyant force in seawater and freshwater

AI Thread Summary
The discussion focuses on the comparison of buoyant forces acting on an object submerged in seawater versus freshwater. It clarifies that the buoyant force is determined by the weight of the displaced liquid, which varies due to differences in water density. When an object is submerged, it displaces the same volume of liquid regardless of the type, but the mass of the displaced water differs, affecting buoyancy. For floating objects like boats, less volume is submerged in denser seawater compared to freshwater, yet the buoyant force remains equal due to the balance of forces acting on the boat. Overall, the key takeaway is that buoyant force is linked to the weight of the displaced fluid, not just its volume.
urbano
Messages
36
Reaction score
0

Homework Statement


I'm doing a problem that is likely a common one. It is comparing the buoyant force of an object in seawater to that of the same object in freshwater. which has more buoyant force acting on it?

Homework Equations



not sure of equations at this stage, and we are just doing it real simple so we are assuming all things are equal other than the water density.

The Attempt at a Solution


My take on it is that the object will displace more volume of freshwater than seawater and the amount displaced is determined by the volume of the object.

However if we captured the displaced water and weighed it they would have the same mass but different volumes.

I believe the buoyant force would be the same, just different volumes of the water has been displaced dependent on the water type.

Further to this, if the object was a boat for example, the mass of the water displaced would be the same as the mass of the boat.

Have I interpreted the basics of buoyant force correctly or am I off down the wrong path ?
 
Physics news on Phys.org
Hi urbano
The buoyant force is determined by the weight of the displaced liquid.
Not its volume.
Of course, the weight is related to the volume, but what matters is the weight.
So if you submerge o solid of some volume V in two different liquids (seawater or freshwater), you will displace the same volume V of said liquid.
but since those liquids have different densities, for one of them, more mass, will be displaced, and the buoyancy resulting force will be stronger.

Cheers...
 
urbano said:
1. My take on it is that the object will displace more volume of freshwater than seawater

correct
and the amount (volume) displaced is determined by (equal to) the volume of the object under water.

However if we captured the displaced water and weighed it they would have the same mass but different volumes. I believe the buoyant force would be the same, just different volumes of the water has been displaced dependent on the water type.

Further to this, if the object was a boat for example, the mass of the water displaced would be the same as the mass of the boat.

Have I interpreted the basics of buoyant force correctly or am I off down the wrong path ?

OK with the added comment above in red.. The assumption is that the boat is floating. All of the above would be incorrect if the boat sank. However, irrespective of floating or sunk, it is always true that the buoyancy force is equal to the weight of the displaced water.
 
Last edited:
ohh I'm definitely confused...

oli4 makes mention of the fact that if I submerge an object in freshwater or seawater then the volume displaced will be identical. I believe this is due to the fact that the object has been submerged.

I guess it's different in the case of a boat floating ? In the case of a floating boat , I believe the boat would displace different volumes of seawater compared to freshwater (i.e less of the boat is physically in the seawater), but the mass of the displaced waters (sea and fresh) would be equal.

? is this correct thinking??
 
Your thinking is correct.
Let us say that an object is submerged to a volume V in a given fluid . Then the fluid applies a force on the object ,which is equal to the force on an equal volume V of the fluid due to the rest of the fluid body. This force is equal and opposite to the weight of the fluid of volume V ( assuming that the fluid body is at rest). This is the bouyant force.

Since the boat is floating , the net force on it is zero ( in the vertical direction) . What are the forces? The Earth's gravitational pull (i.e weight of the boat) and the bouyant force of the fluid. Since the weight of the boat is same in both cases the bouyant Force is also same in both cases.
What is the bouyant force ? It is equal to the weight of the displaced fluid , which is equal to the (density of fluid)*(volume of fluid displaced ) . Thus for the fluids with greater density ,lesser volume is displaced , and hence the volume submerged would be less.
 
urbano said:
ohh I'm definitely confused...

oli4 makes mention of the fact that if I submerge an object in freshwater or seawater then the volume displaced will be identical. I believe this is due to the fact that the object has been submerged.

I guess it's different in the case of a boat floating ? In the case of a floating boat , I believe the boat would displace different volumes of seawater compared to freshwater (i.e less of the boat is physically in the seawater), but the mass of the displaced waters (sea and fresh) would be equal.

? is this correct thinking??

All you just said is corrrect, so why are you " definitely confused"?? :smile:
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top