Calculating Average Speed and Velocity for a Honeybee's Round Trip

  • Thread starter Thread starter ugkwan
  • Start date Start date
  • Tags Tags
    Average
AI Thread Summary
The honeybee travels a total distance of 12 km during its round trip, with a displacement of 0 km since it returns to the starting point. Average speed is calculated as total distance divided by total time, resulting in 12 km/20 min, which can be converted to 1 km/min or 1000 m/min. Average velocity, defined as displacement over time, is 0 km/20 min, leading to an average velocity of 0. The discussion highlights the importance of using appropriate units for clarity, suggesting conversion to meters per second for a more standardized measurement. Understanding these concepts is crucial for accurately calculating speed and velocity in physics.
ugkwan
Messages
2
Reaction score
0
A honeybee leaves the hive, flies in a straight line to a flower 6 km away in 10 min, and then takes 10 minutes to return (also in a straight line).

a.) Please find the distance traveled and displacement for the entire trip:
distance travelled:
I know the distance total is 12 km

displacement: 0

b.) Please find the average speed and average velocity for the entire trip:
average speed:
This is where I get confused. Total distance/rate of change in meters = Average speed. This would mean the speed is undefined.

average velocity:
Same confusion because the algebra would mean this question is undefined with a displacement of zero.
 
Physics news on Phys.org
Velocity = distance / time. As long as your time is not zero, it is defined. It's only the denominator that needs to be non-zero.

The average speed is the total distance traveled divided by total time spent traveling.

The velocity is similar, only it involves the total distance traveled in a direction - that is, the velocity on the way back will be the same as on the way out, only negative.
 
Thanks for the correction. I now see that I had the formula wrong. So it is displacement over time, and time is 20 minutes. So velocity is 0/20 and speed is 12/20.
 
That is correct, but they're funny units (kilometres per minute?).

To change to a more physics-y, SI unit, try metres per second:

(12km*1000 m km^-1)/(12mins*60 s min^-1)

=12000/720= whatever it is.
 
They do that deliberately: that is phrase the question in unweildy units, this makes you render more applicable units by the simple fact of expedience.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top