Calculating Center of Gravity for Shape T: 60mm x 6mm

AI Thread Summary
To calculate the center of gravity for a T-shaped object with arms measuring 60mm long and 6mm wide, the assumption is that the center of gravity lies at the intersection of the arms. The formula suggested for uniform shapes is to take half the height, leading to the calculation of (60 + 6)/2, resulting in a center of gravity at 33mm from the bottom of the T shape. The discussion indicates uncertainty about the exact formula but suggests that the calculation should be straightforward given the uniformity of the shape. Clarification on the formula and its application is requested. Ultimately, the center of gravity is determined to be 33mm from the bottom of the T shape.
JBemp
Messages
22
Reaction score
0

Homework Statement


Center of gravity for a shape T both arm are 60mm long and 6mm wide.




Homework Equations



dont know the equation but seeing as there is not wieght involved am guessing the formula isn't that hard. a discription of the formula and how to use it would help alot




The Attempt at a Solution



if both arms are 60mm and 6mm wide shouldent the center og gravity be where the to arms connect?
 
Physics news on Phys.org
Been checking the net and found that for a uniform shape i should just do H/2

so (60+6)/2 = 33m so the (cg) is 33m from the bottom of the T shape?
 
Last edited:

Thread 'Rolling without slipping on a curved surface'

Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
View full post »
Thread 'Voltmeter readings for this circuit with switches'

Thread 'Voltmeter readings for this circuit with switches'

TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
View full post »
Thread 'Trying to understand the logic behind adding vectors with an angle between them'

Thread 'Trying to understand the logic behind adding vectors with an angle between them'

My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
View full post »

Similar threads

How does center of gravity affect an athlete's jumping ability?
Replies
3
Views
5K
Plank problem/Center of Gravity/Torque/Level Arm(p.26)
Replies
5
Views
12K
Question about Normal Force and Torque
Replies
5
Views
3K
Calculating the center of gravity (hard version)
Replies
5
Views
2K
How does a rod rotate due to gravity?
Replies
6
Views
2K
Equilibrium Problem - Balancing Torques
Replies
4
Views
3K
Calculating Wheel Forces on a Car's Center of Gravity
Replies
14
Views
5K
How Do You Calculate the Overall Center of Gravity for a Person?
Replies
3
Views
8K
Center of Gravity in a Horizontal Cylinder with Water
Replies
2
Views
7K
Calculating Torque on a Gate in a Water Dam
Replies
1
Views
5K

Hot Threads

Recent Insights

Back
Top