Calculating Depth of Water in Floating Cube

AI Thread Summary
A hollow cubical box measuring 0.30 m is floating in a lake, submerged to one-third of its height. The buoyant force acting on the cube is calculated based on the volume of water displaced, which is 0.009 m³, resulting in a weight of 9 kg. To determine the depth of water in the box at the moment it begins to sink, the total weight that can be supported by the displaced water is compared to the weight of the box. The calculations show that an additional 18 kg of water is needed to fill the cube, leading to a water depth of 0.2 m when the box starts to sink. The conclusion confirms that the box will sink when the water reaches a height of 0.2 m.
rsyodoom2005
Messages
15
Reaction score
0
1. A hollow cubical box is .30 m. This box is floating in a lake 1/3 of its height beneath the surface. The walls of the box have neglibe thickness. Water is poured into box. what is the depth of the water in the box at the instant the box begins to sink? pwater= 1000kg/m3

Fb= Pfluid G V
D=M/V


okay so i got the volume of the whole of the box to be .027 m(3) then the volume of the submurged by multyplying .1m * .3m * .3m = .009m
I figure i need to know the buoyent force that is pushing up on the cube before the water is added. so i did 1000kg/m(3) (9.8m/s)(.009m) so once i get that force what i would it set it equal to! help!
 
Physics news on Phys.org
What you need to do is find the maximum weight the displaced water can support. That means you need to find the weight of the water that would be displaced by the whole box. Now you know the weight of the box by finding how much water it displaces floating at a third of its height. Thus all you need to do is add to the box the difference between the max weight for that volume the water can hold and the weight of the box. Once you find the weight of the water you can find the volume and thus how far up the box it will need to be to just sink it.
 
okay so i got the amount of the water being displaced by multypling 1000 kg/m * .009m = 9kg at 1/3 of its height. so the rest 2/3 it would take 18 kg to fill the cube right..so i divided my mass of 18kg by my density of water to get my volume.. my volume i know was .3*.3 * X= i got x to =.2m...so at .2 meter of height the cube will sink...?
 
Seems good to me.
 
thanks for the help!
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Back
Top