Calculating Distance and Time with two boats in a river

  • Thread starter Thread starter tajivie
  • Start date Start date
  • Tags Tags
    River Time
AI Thread Summary
Two boats, A and B, are crossing a river that is 72.9m wide, with Boat A aiming for the shortest distance and Boat B for the shortest time. The velocities are 4.90m/s for the boats and 2.50m/s for the river current. The calculations provided initially are incorrect due to not accounting for the vector components of the boats' velocities. Boat A's time to cross should be calculated using the correct width of 72.9m and the appropriate velocity component, while Boat B's time should also consider the river's influence. Understanding how to apply vector components is crucial for accurately determining the crossing times for both boats.
tajivie
Messages
4
Reaction score
0

Homework Statement



Two boats, A and B, travel with a velocity of 4.90m/s across a river with a width of 72.9m. The river flows with a velocity of 2.50m/s. Boat A travels the shortest distance and boat B travels the shortest time. If both start at the same time, how much time will they take to cross the river?

Homework Equations



There are no equations given, but I was able to use this...
Δd/v(boats)+v(river)=shortest time
Δd/v(boats)-v(river)=shortest distance

The Attempt at a Solution


Boat A: (Shortest Distance)
72.0m/(4.9m/s-2.5m/s)=72/2.4=30s

Boat B:(Shortest Time)
72m/(4.9m/s+2.5m/s)=72/7.4=9.7s≈10.0s

My Answer: Boat A can make it in 30s while Boat B can make it in 10s. I did this on a test and missed all of the points possible. Can anyone please help me find my error ansd reach a resonable answer? Thank You!
 
Physics news on Phys.org
tajivie said:

Homework Statement



Two boats, A and B, travel with a velocity of 4.90m/s across a river with a width of 72.9m. The river flows with a velocity of 2.50m/s. Boat A travels the shortest distance and boat B travels the shortest time. If both start at the same time, how much time will they take to cross the river?

Homework Equations



There are no equations given, but I was able to use this...
Δd/v(boats)+v(river)=shortest time
Δd/v(boats)-v(river)=shortest distance

The Attempt at a Solution


Boat A: (Shortest Distance)
72.0m/(4.9m/s-2.5m/s)=72/2.4=30s

Boat B:(Shortest Time)
72m/(4.9m/s+2.5m/s)=72/7.4=9.7s≈10.0s

My Answer: Boat A can make it in 30s while Boat B can make it in 10s. I did this on a test and missed all of the points possible. Can anyone please help me find my error ansd reach a resonable answer? Thank You!

Neither boat travels directly with or against the current (so simply adding or subtracting the current speed to the boat's speed is not correct). You have to consider velocity components (vectors). Also, the distance is given as 72.9m and you've used 72m.
 
Sorry, I meant to type 72.0 in the original problem instead of 72.9.
Can you explain to me what you mean by vector components? I know what they are, I am just confused as to how you can apply them to this problem.
 
tajivie said:
Sorry, I meant to type 72.0 in the original problem instead of 72.9.
Can you explain to me what you mean by vector components? I know what they are, I am just confused as to how you can apply them to this problem.
A boat's velocity with respect to the river can have two components; one directed straight across the river, and one directed up or downriver. The component directed straight across moves the boat in the direction of the far shore. Only the one directed up/downriver can influence the boat's motion up/downriver.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top