Calculating Gauge Pressure in a Closed Tube

AI Thread Summary
To calculate the gauge pressure at point A in the closed tube filled with oil, the relevant formula is gauge pressure = (density)gh. The density of the oil is specified as 900 kg/m³, and the height (h) is 0.5 m. One participant calculated the gauge pressure to be 4,400 Pa by first determining total pressure and then subtracting atmospheric pressure, while another clarified that it is unnecessary to calculate total pressure. The discussion emphasizes the importance of using the correct approach to find gauge pressure directly. The correct gauge pressure calculation method is highlighted for clarity.
Beastegargoyl
Messages
9
Reaction score
0

Homework Statement


The container shown in the figure is filled with oil. It is open to the atmosphere on the left.
What is the gauge pressure at point A? Point A is 50cm high from the ground and 50 cm from the top.

Homework Equations


po+(density)gd



The Attempt at a Solution


I took 1 atompshere in Pa of 1.013*105+900*G which is 9.8*.5m and I came up with an answer of 1.057 then I subtracted the gauge pressure of 101.3 kPa and solved for the final answer to be 4,400Pa.

Does anyone come up with the same answer?
 
Physics news on Phys.org
What's the density of the oil? Gauge pressure is just (density)gh, so you don't have to calculate total pressure and then subtract atmospheric pressure.
 
The denisty of oil is 900kg/m3
 
Thread 'Collision of a bullet on a rod-string system: query'

Thread 'Collision of a bullet on a rod-string system: query'

In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
View full post »

Similar threads

What is the relationship between tire size and pressure changes?
Replies
13
Views
918
How do I calculate the gauge pressure?
Replies
2
Views
5K
Finding the gauge pressure at the bottom of a barrel
Replies
4
Views
3K
Understanding Pressure and Volume in a U-shaped Tube
Replies
13
Views
3K
Calculating the Depth for 1 atm Gauge Pressure in Fresh Water
Replies
2
Views
2K
What is the effect of applied pressure on a partially filled U-shaped tube?
Replies
1
Views
2K
Gauge pressure at the bottom of a barrel
Replies
2
Views
2K
What is the Gauge Pressure Inside a Hot Gas-Filled Incandescent Light Bulb?
Replies
1
Views
5K
Gauge Pressure of Tires - find car mass
Replies
4
Views
19K
Calculating Gauge Pressure at the Bottom of a Test Tube
Replies
5
Views
8K

Hot Threads

Recent Insights

Back
Top