Calculating Tightrope Tension with Waves: Circus Performer Homework Solution

  • Thread starter Thread starter sun
  • Start date Start date
  • Tags Tags
    Tension Waves
AI Thread Summary
A circus performer sends a wave along a tightrope, taking 0.880 seconds to travel 20 meters. The wave speed is calculated to be 22.72 m/s. Tension in the rope is derived from the formula Tension = v^2(mu), where mu is the mass per unit length. There is confusion regarding the mass value used for calculations, with one participant mistakenly using 0.255 kg instead of the correct 0.225 kg. Correcting this error is essential for accurately calculating the tension in the tightrope.
sun
Messages
39
Reaction score
0

Homework Statement



A circus performer stretches a tightrope between two towers. He strikes one end of the rope and sends a wave along it toward the other tower. He notes that it takes the wave 0.880 s to reach the opposite tower, 20.0 m away. If a 1 meter length of the rope has a mass of 0.255 kg, find the tension in the tightrope.


Homework Equations



v-f(lambda)
v=sqrt.(tension/mu)
mu=mass per unit length
tension=mg
f=1/t

The Attempt at a Solution



I solved for wave speed using v=f(lambda)
f=1/T=1/.88s=1.136Hz
Delta(x)=lambda=20m, so 20m x 1.136=22.72m/s

Tension=v^2(mu) = (22.72)^2(.225/20) or (22.72)^2(.225/1) ??

I'm not sure what I'm doing wrong. Suggestions would be appreciated.

thanks
 
Last edited:
Physics news on Phys.org
sun said:
I solved for wave speed.
f=1/T=1/.88s=1.136Hz
Delta(x)=lambda=20m, so 20mX1.136=22.72m/s
I'm not following all that calculation. You are not given any data about f, T, or lambda.

The speed can be found simply by v = d/t = 20/.88 = 22.72m/s.

Tension=v^2(mu) = (22.72)^2(.225/20) or (22.72)^2(.225/1) ??
.225 kg is the mass of a 1 m section; so mu = mass/length = .225 kg/m.
 
i don't know what I'm doing wrong when i use 22.72 to calculate the tension in the rope using: v=sqrt.(tension/mu)

maybe I'm calculating mu incorrectly? any ideas?

thank you very much
 
sun said:
maybe I'm calculating mu incorrectly? any ideas?
You used two versions of mu. One is right; one is wrong.
 
from what I've read i believe mu=.225 is the correct one. Because that is the mass for every 1 meter of string. Regardless of the mu I've been using i still get an incorrect answer.

this is why I'm still a bit confused.

thank you
 
suggestions as to what i may be doing wrong would be greatly appreciated.
 
i get 116.15N when i solve for tension, but this is wrong.

I could really use some help as soon as possible, please.

thank you
 
typo!

sun said:
i get 116.15N when i solve for tension, but this is wrong.
Here's the likely problem: In your first post you state the mass as 0.255 kg, but in later posts you use 0.225 kg. Recalculate the answer using the correct value.
 
Pure Genius! :P

At the rate i was going, i definitely would not have noticed that. :(

thank you
 
Back
Top