How to Model a Control System for an RLC Circuit?

AI Thread Summary
To model a control system for an RLC circuit, start by determining the transfer function, V0(s)/Vi(s), which represents the circuit's behavior. Utilize resources like the tutorial from the University of Michigan for guidance on modeling techniques. Understand the analogies between inertial and electrical systems to tailor examples to your specific needs. After establishing the transfer function, design the control system incorporating feedback as necessary. This approach will help ensure a thorough and effective model.
Jimbo
Messages
10
Reaction score
0
Hi

I was wondering if anyone knew of any good tutorials on modelling control systems - I have to convert a RCL circuit to a control system - i understand things like how to express components mathmatically but am confused as to steps I should take to make sure I do a thorough model?

Any info much appreciated

Jimbo
 
Engineering news on Phys.org
Try this one:

http://www.engin.umich.edu/group/ctm/

If you need to taylor any of the examples to your specific problem, remember that there are analogies between inertial systems and electrical systems.
 
...

Try finding out the transfer function of ur RLC ckt by calculating the V0(s)/Vi(s). Then use this as ur transfer function, G(s), then, using the inputs design ut control system with or without a feedback...


Hope u got it...
Sridhar
 

Thread 'Questions about the Tesla turbine'

Hi all, i have some questions about the tesla turbine: is a tesla turbine more efficient than a steam engine or a stirling engine ? about the discs of the tesla turbine warping because of the high speed rotations; does running the engine on a lower speed solve that or will the discs warp anyway after time ? what is the difference in efficiency between the tesla turbine running at high speed and running it at a lower speed ( as fast as possible but low enough to not warp de discs) and: i...
View full post »
Thread 'Where is my curb stop?'

Thread 'Where is my curb stop?'

My water meter is submerged under water for about 95% of the year. Today I took a photograph of the inside of my water meter box because today is one of the rare days that my water meter is not submerged in water. Here is the photograph that I took of my water meter with the cover on: Here is a photograph I took of my water meter with the cover off: I edited the photograph to draw a red circle around a knob on my water meter. Is that knob that I drew a red circle around my meter...
View full post »

Similar threads

(Control) Derivative filter and discrete model
Replies
0
Views
2K
How to model the behavior of a closed loop position system?
Replies
9
Views
3K
How to Implement Control for an Inverted Pendulum System?
Replies
4
Views
5K
Modeling Ball and Spinning System
Replies
2
Views
2K
Modelling Inverted Pendulum With 2 Propellers (Control Engineering)
Replies
4
Views
1K
Control Theory: Derivation of Controllable Canonical Form
Replies
3
Views
3K
Understanding Root Locus Method: Stability and Response of Control Systems
Replies
4
Views
4K
Zero order hold -- Discrete control systems
Replies
12
Views
8K
How can I accurately model a digital control valve without physical testing?
Replies
3
Views
2K
Discrete Control System with Time Delay
Replies
1
Views
4K

Hot Threads

Recent Insights

Back
Top