How Fast Is the Suction Rate of a Gravity Type Coalescing Separator?

AI Thread Summary
The suction rate of a gravity type coalescing separator typically ranges from 50 to 500 liters per minute, influenced by the separator's size, design, fluid viscosity, and temperature. Processing time can vary widely, generally taking from a few minutes to several hours based on similar factors. Understanding these variables is crucial for effective operation and project outcomes. Accurate specifications are essential for optimal performance. This information is valuable for anyone working with coalescing separators in fluid processing applications.
rohan_verma
Messages
1
Reaction score
0
hi,how fast is the suction rate of a gravit type colescing spartor and ho log does i take to process it?
 
Physics news on Phys.org
I'm sorry, I think it's very hard to understand your question. Could you ask again? Please use a spell checker if you have one on your computer, that may help.

-sev
 


Hello,

I would be happy to help you with your science project. The suction rate of a gravity type coalescing separator can vary depending on factors such as the size and design of the separator, the viscosity of the fluid being processed, and the temperature of the fluid. Generally, the suction rate can range from 50-500 liters per minute.

As for the processing time, it can also vary depending on the same factors mentioned above. However, on average, it can take anywhere from a few minutes to a few hours for the coalescing separator to fully process the fluid.

I hope this information helps with your project. Let me know if you have any further questions. Best of luck!
 

Thread 'Rolling without slipping on a curved surface'

Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
View full post »

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »

Similar threads

How fast should the Earth spin for centripital accel. to equal gravity?
Replies
8
Views
3K
Water Rocket Science Project by Tanguy: Reach 11,2k m/s!
Replies
14
Views
1K
Flow rate of water from thin tubes under high g-force
Replies
2
Views
1K
How Does Closing a Valve Affect Flow Rates in Multi-Suction Pipe Systems?
Replies
3
Views
5K
Effect of suction flow rate over flow separation
Replies
13
Views
6K
How fast does the Earth need to move to provide centripital acceleration
Replies
43
Views
8K
I Effect of Black Hole Spin on Gravity
Replies
18
Views
2K
I Why does the core collapse happen so fast in a supernova?
Replies
3
Views
3K
I Cat Chasing Red Dot Faster Than c: Results & Analysis
Replies
13
Views
2K
How fast will this torsion spring open a lid?
Replies
4
Views
3K

Hot Threads

Recent Insights

Back
Top