Cannot solve Problems related to a Clock

AI Thread Summary
The discussion revolves around calculating the speed, velocity, and other kinematic properties of a clock's hour hand at 3:27:49. The user struggles with determining the central angle for the hour hand, initially calculating it as 103.9 degrees based on the time converted to hours. Confusion arises when attempting to form a triangle with this angle, leading to incorrect assumptions about the triangle's properties. Another participant suggests using the law of sines or cosines for oblique triangles to resolve the issue. Ultimately, the user successfully finds the angles and answers to the problem after this guidance.
ConfusedPhysics
Messages
2
Reaction score
0
"A clock has an hour hand that is 15.0 cm long, a minute hand that is 20.0 cm long, a secondhand that is 25.0 cm long."
"The time is 3 h 27 min 49 s"
"the hands are moving clockwise"
"for the hour hand calculate
1. speed of the hand
2. velocity of the hand at the given time"
"presume the hand from the the 12 position and find the change in
3. velocity,
4. average velocity,
5. average acceleration,
6. displacement"

The thing i am having the most trouble with is finding the central angle for the clock.

if i change time time into hours, it equals to 3.46 hours


if I multiply it by 30 to find the angle since each hour is 30 degrees to 12 o'clock it equals to 103.9 degrees.
but if i create a triangle using that number and the radius of the hour hand it will look like
this.
but this triangle does not make any sense since if solve for any of the other angles it will equal to
x= tan-1 (15/15)
x=45 degree
but that will make the angle equal to over 180 degrees, so i am confused on what i am supposed to do.1. The speed of the hour hand is the distance it goes divided by the time so
2*pi*r /(60*60)=v
v=7.6x10^-3 cm/s

2. the velocity of the given time is the magnitude of the speed so it is the same number but the i can't find the angle
V=7.6x10^-3 [some angle]

3. ∆v=(vf-vi)

∆v=(7.6x10^-3)^2+(-7.6x10^-3)^2-2(7.6x10^-3)(-7.6x10^-3)cos103.9
∆v=8.8x10^-5 cm/s

Its mostly the angle on what i am confused about
 
Physics news on Phys.org
ConfusedPhysics said:
"A clock has an hour hand that is 15.0 cm long, a minute hand that is 20.0 cm long, a secondhand that is 25.0 cm long."
"The time is 3 h 27 min 49 s"

The thing i am having the most trouble with is finding the central angle for the clock.

if i change time time into hours, it equals to 3.46 hours

When the clock is at 3:00:00 exactly, the hands will appear like this: L

When the time is 3:27:49, I don't think the clock hands make the triangle as shown in your attachment.

if I multiply it by 30 to find the angle since each hour is 30 degrees to 12 o'clock it equals to 103.9 degrees.
but if i create a triangle using that number and the radius of the hour hand it will look like
this.
but this triangle does not make any sense since if solve for any of the other angles it will equal to
x= tan-1 (15/15)
x=45 degree
but that will make the angle equal to over 180 degrees, so i am confused on what i am supposed to do.

I'm not sure what you are doing here, but you can't treat this triangle like it was a right triangle. You have an oblique triangle, so you've got to use the law of sines or the law of cosines to figure out the missing information about the triangle.
 
Thank you so much, I completely forgot about that. I found the angles and the answers to the problem
 
Last edited:
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top