Catapult: Rotating Throwing Arm to Reduce Air Resistance?

  • Thread starter Thread starter kj99
  • Start date Start date
  • Tags Tags
    Catapult Project
AI Thread Summary
Rotating the throwing arm of a catapult to its side may reduce air resistance due to a smaller surface area, though air resistance is not a significant factor for a standard golf ball projectile. Optimizing the speed of the arm is beneficial, but issues arise with spring tightness causing mechanical failures. The primary goal of the project is to achieve distance for a higher mark, while ensuring the device remains intact to avoid losing points. Projectile analysis indicates a distance of 40m, an angle of 45 degrees, and a velocity of 19.8m/s, prompting questions about calculating centripetal acceleration. Additional calculations may include analyzing the effects of the arm's radius and pull-back angle on overall performance.
kj99
Messages
10
Reaction score
1
Would rotating the throwing arm (2cm by 4cm) to its side reduce air resistance due to the smaller surface area? (Imagine a palm vs karate chop scenario).
 
Physics news on Phys.org
Yes - is air resistance a significant factor in your design?
 
  • Like
Likes kj99
Simon Bridge said:
Yes - is air resistance a significant factor in your design?
Not really for the projectile since it's a standard golf ball but whatever optimizes the speed of the arm is a bonus. However the tighter my springs are the more often they pop off the circle screws and the tightness also dent my pivot arm (thin metal pole).
 
May I ask what you're goal for this project is? Are you going for distance? For consistency? Something else?
 
Drakkith said:
May I ask what you're goal for this project is? Are you going for distance? For consistency? Something else?
Distance gets me a higher mark but if it breaks I won't get a mark at all lol.
 
  • Like
Likes Drakkith
Drakkith said:
May I ask what you're goal for this project is? Are you going for distance? For consistency? Something else?
Projectile Analysis:
Distance = 40m
Angle = 45 degrees
Velocity = 19.8m/s
Can I use the projectile velocity to calculate centripetal acceleration?

Other Given:
Radius/length of arm: 40cm
Pull back angle: 60 degrees
Spring length: 15cm
Mass of ball is 46g
Time(ball): 2s
What else can I calculate with this?
 

Thread 'The Physics of unloading sand from a barge'

I think it's easist first to watch a short vidio clip I find these videos very relaxing to watch .. I got to thinking is this being done in the most efficient way? The sand has to be suspended in the water to move it to the outlet ... The faster the water , the more turbulance and the sand stays suspended, so it seems to me the rule of thumb is the hose be aimed towards the outlet at all times .. Many times the workers hit the sand directly which will greatly reduce the water...
View full post »

Similar threads

Why Does a Ball Rotate When Thrown and What Forces Keep it in the Air?
Replies
17
Views
2K
A few questions about airflow and filters...
Replies
5
Views
2K
I Equalizing airflow through multi-hole orifices
Replies
3
Views
1K
Trebuchet Throwing Arm Optimization
Replies
10
Views
3K
I Is the Blade Loading Sufficient for Minimum Sliding Resistance at Top Speed?
Replies
2
Views
946
I Why do bullets precess in the opposite way from gyroscope diagrams?
Replies
23
Views
3K
What is the trajectory of an object thrown within a rotating centrifuge?
Replies
19
Views
5K
Comparetto type Air Cleaner/Filter: What causes its increased airflow?
Replies
5
Views
3K
How is force applied? Is resistance or load necessary for force to exist?
Replies
7
Views
2K
Appliances Peltier based mini air conditioner not working
Replies
21
Views
7K

Hot Threads

Recent Insights

Back
Top