Calculating Center of Mass for a Circular Hole in a Uniform Square Sheet Metal

AI Thread Summary
To calculate the center of mass for a circular hole in a uniform square sheet metal, the circular hole's diameter is 11.1 cm, and the square's side is 22.2 cm. The center of mass shifts based on the hole's position; if the hole is at the center, the center of mass of the remaining material is calculated using negative mass for the removed section. The formulas provided for the center of mass are X_{cm}= - \frac{\pi 11.1}{32} and Y_{cm}= - \frac{\pi 11.1}{32}, though the origin of the number 32 is questioned. Understanding the derivation of these values is crucial for accurate calculations.
pringless
Messages
43
Reaction score
0
A circular hole of diameter 11.1 cm is cut out of a uniform square of sheet metal having sides 22.2 cm, as in the figure. What is the distance between the center of mass and the center of the sqaure?

i need some serious help with cm, i don't get this at all.
 
Physics news on Phys.org
U might consider The removed part as negative mass
 
Last edited:
Where is the circular hole located (no fig shown)

If it is removed from centre than the CM won't change
 
top right corner of the sqaure
 
since considering Centre of square as origin

X_{cm}= - \frac{\pi 11.1}{32}
Y_{cm}= - \frac{\pi 11.1}{32}



sookh kar kaanta ho chuka hoon
 
where did the 32 come from?
 

Thread 'Rolling without slipping on a curved surface'

Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
View full post »

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »

Similar threads

Center of mass and momentum- A question about systems
Replies
25
Views
1K
Finding the center of mass of a simple 2D shape
Replies
9
Views
3K
Finding the center of mass of a solid hemisphere
Replies
19
Views
3K
Final velocity of the barbell dropped after a dead lift
Replies
7
Views
870
Misunderstanding Work-energy theorem and center of mass properties
Replies
7
Views
2K
Calculating the center of mass as an astronaut moves on a shuttle
Replies
5
Views
2K
How Far is the Center of Mass from the Center of a Square with a Circular Hole?
Replies
1
Views
2K
Calculate the center of mass of a non-uniform metal rod
Replies
13
Views
2K
Where Is the Center of Mass of a Leg?
Replies
8
Views
3K
Center of mass of a disk with a hole
Replies
8
Views
4K

Hot Threads

Recent Insights

Back
Top