Circular Angular Acceleration problem

AI Thread Summary
The problem involves calculating the acceleration of a stone stuck in the tread of a tire spinning at a constant speed of 60.0 mi/h. The tire's diameter is 2.00 feet, leading to a radius of 0.305 meters. The initial calculations for angular velocity (ω) and tangential acceleration (a_t) were incorrect, as the correct approach involves using centripetal acceleration. The proper formula for centripetal acceleration is a_c = v^2/r, where v is the linear speed converted to meters per second. Ultimately, the correct centripetal acceleration is approximately 2350 m/s².
the7joker7
Messages
111
Reaction score
0

Homework Statement



A tire 2.00 feet in diameter is placed on a balancing machine, where it is spun so that its tread is moving at a constant speed of 60.0 mi/h. A small stone is stuck in the tread of the tire. What is the acceleration of the stone as the tire is being balanced?

Homework Equations



\omega = \frac{change in theta}{change in time}

r = diameter/2

\alpha = \frac{\omega - \omega_{0}} {time}

a_{t} = r*\alpha

The Attempt at a Solution



\omega = 840.3 rev/min = 88 radians/sec.

radius = .305m.

\alpha = \frac{88 radians}{1 second} = 88 radians/second^{2}.

a_{t} = .305 *88 = 26.84 m/s^{2}
 
Physics news on Phys.org
You got omega (I'll call it w) just fine somehow. I'm not sure how because it's not clear what you did. But acceleration isn't w*r, that's velocity v. 26.8m/sec=60mi/hr. You are back where you started. Acceleration is v^2/r=(w*r)^2/r=w^2*r.
 
Well, going from 60mi/hr to radians/second is pretty basic math as long as you know the transformation values.

Thanks for the help!

EDIT: I got 88^{2} * .305 = 2631.92radians/seconds^{2}. Look right?
 
Last edited:
Use the equation centripetal acceleration = v^2/r. The radius s 1.00 ft, or .305 m. V is 60 mi/h, or 26.8 m/s. Then the acceleration would be (26.8)^2/0.305, which is 2350 m/s^2
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top