Coefficient of Kinetic Friction on an Incline

AI Thread Summary
A block on an incline is analyzed, moving 3.5 m in 4.8 s at a 31-degree angle, with gravity at 9.8 m/s². Initial calculations for acceleration using gsin(31) yield 5.05 m/s², but applying the formula for distance leads to a conflicting acceleration of 0.304 m/s². The coefficient of kinetic friction is derived from free body diagrams, resulting in Mk = tan(31), which equals approximately 0.601. However, confusion arises regarding the net forces acting on the block, particularly the role of friction in calculating acceleration. The discussion emphasizes the importance of correctly applying Newton's Second Law and free body diagrams to resolve these issues.
graywolf27
Messages
4
Reaction score
0
Here is the problem: A block is released from rest on an inclined plane and moves 3.5 m during the next 4.8 s at an angle of 31 degrees. The acceleration of gravity is 9.8 m/s^2. What is the magnitude of the acceleration of the block? what is the coefficient of Kinetic Friction Muk for the incline?
- I already identified Xinitial = 0, Vxinitial =0, distance = 3.5 m, time = 4.8 s, theta = 31
- to get the acceleration I used asubx = gsin(31) which gave me 5.05 m/s^2
But then again there is this formula Xfinal = Xinitial + Vxinitial*t +0.5at^2 which at the end becomes a=2distance/t^2 giving me a value for a=0.304 m/s^2 and this is the point were I get confused :frown: .

- For the coefficient of Kinetic friction, I used free body diagrams which gave me a formula of Mk=mgsin(theta)/mgcos(theta) then Mk=tan(theta) I substituded Mk=tan(31) and got an answer of Mk=0.601
Am I on the right track? Any help will be appreciated :)
 
Physics news on Phys.org
Your acceleration is wrong, because you didn't take in account friction. Start from Newton's 2nd Law.
 
Basically I have the wrong formulas then... I found out, by re-reading my book that the Fnet = m*a in Newton's Second Law which means that I have to find first the Net Force? I already have the value for mass = 9Kg and the acting forces are the ones who make the object move? Because according to my problem, it starts moving from rest which mean that only the object's mass affected by gravity makes the force I got confused...
 
and the kinetic friction value is not given also, and I don't know if the one I got is right Mk=tan(31) Mk=0.601
 
Are you familiar with the concept of Free Body Diagram and Newton's Laws?, you are just pluggin numbers in formulas...
 
yeah I have the hang of free body diagrams but I still get confused... I already found the Mk = 0.56 and I'm missing the acceleration of the object. By using the free body diagrams I got Fy= mgsin(theta)+Mkmgcos(theta) =ma then I got for a= gsin(theta)+Mkgcos(theta)
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top