Conference on Water, Steam, and Aqueous Solutions for Electric Power

AI Thread Summary
The 14th International Conference on the Properties of Water and Steam highlighted significant advancements in science and technology related to water, steam, and aqueous solutions for electric power generation. The proceedings, edited by experts in the field, include valuable research papers that contribute to understanding these properties. The International Association for the Properties of Water and Steam provides additional resources and information relevant to the conference. The upcoming 15th International Conference promises to further explore these advancements. This ongoing dialogue emphasizes the critical role of water and steam properties in enhancing power generation technologies.
Astronuc
Staff Emeritus
Science Advisor
Gold Member
Messages
22,341
Reaction score
7,139
– Advances in Science and Technology –

Proceeings of the 14th International Conference on the Properties of Water and Steam
Editors: Masaru Nakahara, Nobuyuki Matubayasi, Masakatsu Ueno, Kenji Yasuoka and Koichi Watanabe

http://www.iapws.jp/proceedings.html

Some very useful and interesting papers here.
 
Engineering news on Phys.org
Last edited by a moderator:

Thread 'Race car suspension Class'

Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
View full post »
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
View full post »

Thread 'Cantilever help'

I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
View full post »

Similar threads

Pressure change at the inlet of a steam turbine in a small electric power plant
Replies
4
Views
4K
Atomic displacements, replacements, and radiation damage of structural materials
Replies
1
Views
656
STAIF-2006: Space Technology & Applications International Forum
Replies
1
Views
5K
Plumbing Compressed air powered water pressure
Replies
39
Views
14K
Synhelion -- Using solar heliostat farms to create liquid fuels from Water Vapor and CO2
Replies
7
Views
2K
Chemically regenerating my auto's catalytic converter?
Replies
19
Views
7K
Sandia Res. Reveals Impact of "Metallic Water" on Neptune & Physics
Replies
2
Views
4K
Statement of Purpose for us physics grad
Replies
10
Views
10K
Programs Environmental Solutions and Semiconductors: Research Interests and Career Goals
Replies
2
Views
2K
Advance of Technology; 1818 to 2318....
Replies
22
Views
6K

Hot Threads

Recent Insights

Back
Top