Conversation of energy to determine angular velocity

AI Thread Summary
The discussion revolves around using the conservation of energy to determine the angular speed of a spool after a 3.00 kg bucket falls 4.00 m. The potential energy of the falling bucket is calculated as 117.6 J, which should equal the kinetic energy of the spool. The moment of inertia for the spool was initially miscalculated, leading to an incorrect angular velocity of 12.9 m/s. Upon correcting the moment of inertia to 0.45, the final angular speed is recalculated to be 10.9 rad/s, which matches one of the provided multiple-choice answers. This highlights the importance of accurate calculations in physics problems.
deltaOmega
Messages
3
Reaction score
0

Homework Statement


[From Serway College Physics; Ch 8, problem 52] Use conversation of energy to determine the angular speed of the spool shown in the figure after the 3.00 kg bucket has fallen 4.00 m, starting from rest. The light string attached to the bucket is wrapped around the spool and does not slip as it unwinds.

qPxF9.png


For variables:
m_{bucket} = 3.00 kg
m_{spool} = 5.00 kg
r = 0.600 m

Homework Equations


I_{spool} = \frac{1}{2} mr^2
PE = mgh
KE_{r} = \frac{1}{2} m \omega^2
PE_i + KE_i = PE_f + KE_f
v_t = r \omega

The Attempt at a Solution


I've seen variants of this question all over the web, including this site, but none of them were helpful to me.

Obviously the only thing driving the bucket down is gravity, which will unwind our spool. So potential energy is:

PE = m_{bucket} g h
PE = (3 \text{kg})(9.8 \text{N/kg})(4 \text{m})
PE = 117.6 \text{J}

Since potential energy is unwinding the spool, then the spool's kinetic rotational energy (KE_{r} = \frac{1}{2} m \omega^2) should be equal to the potential energy (PE_{bucket} = KE_{r}).

I tried to derive the angular velocity from this with:
117.6 \text{J} = \frac{1}{2} m_{bucket} v^2 + \frac{1}{2} I_{spool} \omega^2
117.6 \text{J} = \frac{1}{2} m_{bucket} (r \omega)^2 + \frac{1}{2} (\frac{1}{2} m_{spool} r^2) \omega^2
117.6 \text{J} = \frac{1}{2} (3.00 \text{kg})(0.600 \text{m})^2 \omega^2 + \frac{1}{2} ( \frac{1}{2} (5.00 \text{kg})(0.600 \text{m})^2) \omega^2
117.6 \text{J} = 0.54 \omega^2 + 0.162 \omega^2
117.6 \text{J} = 0.702 \omega^2
167.52 = \omega^2
12.9 \text{m/s} = \omega

However, this cannot be right, as the question is multiple choice and only offers the following answers: 7.12, 8.66, 9.12, 10.9, or 11.8.

Help would be appreciated.
 
Last edited:
Physics news on Phys.org
deltaOmega said:

Homework Statement


[From Serway College Physics; Ch 8, problem 52] Use conversation of energy to determine the angular speed of the spool shown in the figure after the 3.00 kg bucket has fallen 4.00 m, starting from rest. The light string attached to the bucket is wrapped around the spool and does not slip as it unwinds.

qPxF9.png


For variables:
m_{bucket} = 3.00 kg
m_{spool} = 5.00 kg
r = 0.600 m

Homework Equations


I_{spool} = mr^2
PE = mgh
KE_{r} = \frac{1}{2} m \omega^2
PE_i + KE_i = PE_f + KE_f
v_t = r \omega

The Attempt at a Solution


I've seen variants of this question all over the web, including this site, but none of them were helpful to me.

Obviously the only thing driving the bucket down is gravity, which will unwind our spool. So potential energy is:

PE = m_{bucket} g h
PE = (3 kg)(9.8 N/kg)(4 m)
PE = 117.6 J

Since potential energy is unwinding the spool, then the spool's kinetic rotational energy (KE_{r} = \frac{1}{2} m \omega^2) should be equal to the potential energy (PE_{bucket} = KE_{r}).

I tried to derive the angular velocity from this with:
117.6 J = \frac{1}{2} m_{bucket} v^2 + \frac{1}{2} I_{spool} \omega^2
117.6 J = \frac{1}{2} m_{bucket} (r \omega)^2 + \frac{1}{2} (\frac{1}{2} m_{spool} r^2) \omega^2
117.6 J = \frac{1}{2} (3.00 kg)(0.600 m)^2 \omega^2 + \frac{1}{2} ( \frac{1}{2} (5.00 kg)(0.600 m)^2) \omega^2
117.6 J = 0.54 \omega^2 + 0.162 \omega^2
117.6 J = 0.702 \omega^2
167.52 = \omega^2
12.9 m/s = \omega

However, this cannot be right, as the question is multiple choice and only offers the following answers: 7.12, 8.66, 9.12, 10.9, or 11.8.

Help would be appreciated.

Hello deltaOmega. Welcome to PF !

It seems to me that your moment of inertia for the spool is incorrect.
 
Oops, it should be \frac{1}{2} m r^2, as used in the work later.
 
deltaOmega said:
Oops, it should be \frac{1}{2} m r^2, as used in the work later.
So that's OK ?

What is (1/2)(1/2)(5)(0.6)2 ?

It's not 0.162
 
I think you mean conservation of energy, not conversation.
 
SammyS said:
So that's OK ?

What is (1/2)(1/2)(5)(0.6)2 ?

It's not 0.162

Well, that's embarassing. That ends up being 0.45, which changes the final answer to 10.9 rad/s, corresponding with one of the multiple choice answers. Thanks.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top