Crate on a cable statics question

  • Thread starter Thread starter divineyang
  • Start date Start date
  • Tags Tags
    Cable Statics
AI Thread Summary
The discussion centers around a statics problem involving a crate and the forces acting on it. The participant identifies three forces: the weight of the crate and the two tensions in the cables. They confirm that the gravitational force is equal to the sum of the vertical components of the tensions. Clarification is provided that no additional forces are acting on the crate. The conversation concludes with the participant expressing gratitude for the confirmation.
divineyang
Messages
8
Reaction score
0

Homework Statement


Please refer to the attachment.

Homework Equations


Sum of x and y forces = zero
Sum of moments about any point = zero

The Attempt at a Solution


By looking at the portion of the string under the crate, there are 3 forces acting on it, namely the two tensions at the side and the weight of the crate. Hence I deduce that the gravitational force of the crate acting on the string is the sum of the two vertical components of the tensions.

Can anyone tell me if I'm right or am I missing out on any forces?

Please help, thanks much!
 

Attachments

  • Crate on Cable.jpg
    Crate on Cable.jpg
    26.5 KB · Views: 447
Last edited:
Physics news on Phys.org
You are correct. Next you'll have to use a little trig to find the angle that the cables make.
 
oh i got the angle already, I was just confused as to whether there were any more forces acting on it. thanks for the clarification!
 

Thread 'Errors and significant figures'

I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
View full post »
Thread 'A cylinder connected to a hanging mass'

Thread 'A cylinder connected to a hanging mass'

Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
View full post »

Similar threads

Time it Takes for a Transverse Pulse to Travel a Distance "L" Up a Cable Against Gravity?
Replies
13
Views
1K
Friction Problem of a Crate Sliding Down a Ramp
Replies
4
Views
3K
Is it friction or tension acting on the person hanging on a rope?
Replies
4
Views
998
Force pulling on a string at an angle with a block at the other end
Replies
2
Views
1K
Solve Static Equilibrium: Beam, 520N Force, Cable Tension
Replies
2
Views
2K
Ideal Vs Real Mass Pulley system
Replies
10
Views
5K
How to Find Coeffecient of Static Friction?
Replies
2
Views
2K
Statically Indeterminate Truck - Finding reaction forces at supports
Replies
8
Views
2K
Static Equilibrium/Torque-Calculating the force required to tip a box
Replies
1
Views
8K
Rolling without slipping problem
Replies
42
Views
3K

Hot Threads

Recent Insights

Back
Top