Creating a Car Model for Turning: Dynamics Knowledge Needed

AI Thread Summary
Creating a car model for turning requires a solid understanding of vehicle dynamics, particularly the forces acting on the wheels during a turn. Resources such as academic papers, textbooks, and online courses can provide the necessary knowledge. A shared link to class notes from an automotive course offers valuable insights into vehicle dynamics. Users are encouraged to save the notes for future reference, as their availability may be limited. Understanding these dynamics is crucial for accurate modeling of car behavior during turning maneuvers.
JoaoRebelo
Messages
1
Reaction score
0
I'm trying to create a model for a car turning to make a differential (I need forces aplied on the wheel, and all other things) but I don't have enough knowledge of dynamics to do that. Does someone know a book(s), papers or sites with good explanation about that?
 
Engineering news on Phys.org
http://www.me.ttu.edu/UserFiles/File/Maxwell%20Spr%2006%20Auto%20Sys/Intro%20to%20vehicle%20dynamics%201.pdf

Try that file. Those are notes from an automotive class being offered at my university. I can't tell you how long those will be up so you may want to save them.

Hope this helps.
 

Thread 'Bubble formation in 4 mm gap vessel'

How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
View full post »
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
View full post »

Thread 'Find 3D Printer & Software Resources for Prototype Creation'

I'd like to create a thread with links to 3-D Printer resources, including printers and software package suggestions. My motivations are selfish, as I have a 3-D printed project that I'm working on, and I'd like to buy a simple printer and use low cost software to make the first prototype. There are some previous threads about 3-D printing like this: https://www.physicsforums.com/threads/are-3d-printers-easy-to-use-yet.917489/ but none that address the overall topic (unless I've missed...
View full post »

Similar threads

Modeling Air Compression Cylinder
Replies
45
Views
5K
Data sources for Vehicle Dynamics Model validation?
Replies
4
Views
2K
Need advice on making my lamp! Turn dial into string pulled mechanism?
Replies
8
Views
1K
Advice needed for producing a water powered car model project
Replies
4
Views
3K
Integrating FE and Dynamics
Replies
2
Views
2K
When are Lumped-element models used in the design process?
Replies
5
Views
1K
Can a piezoelectric create dynamic pressure in oil fluid for energy harvesting?
Replies
3
Views
2K
Automotive Solving Traction & Friction Issues with Car Simulation
Replies
6
Views
4K
B How come friction can make a car turn?
Replies
10
Views
2K
Doublet flow in Fluid Dynamics between two spheres or cylinders
Replies
0
Views
1K

Hot Threads

Recent Insights

Back
Top