Discover the Uses of Acrylic Tools and Equipment | Deedo's Question

  • Thread starter Thread starter optics.tech
  • Start date Start date
AI Thread Summary
Acrylic tools and equipment are commonly used for cutting, shaping, and finishing acrylic materials. Typical operations include laser cutting, CNC machining, and polishing to achieve precise designs and smooth edges. Users often seek guidance on specific tools for tasks like engraving or creating intricate patterns. The discussion emphasizes the importance of understanding tool capabilities for effective acrylic work. Engaging with the community can provide valuable insights into the best practices and tools for acrylic projects.
Engineering news on Phys.org
This reeks of homework. We don't do it for you. What are some typical tool operations?
 
How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'
Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
I'd like to create a thread with links to 3-D Printer resources, including printers and software package suggestions. My motivations are selfish, as I have a 3-D printed project that I'm working on, and I'd like to buy a simple printer and use low cost software to make the first prototype. There are some previous threads about 3-D printing like this: https://www.physicsforums.com/threads/are-3d-printers-easy-to-use-yet.917489/ but none that address the overall topic (unless I've missed...
Back
Top